NEW! Acorn A3000/3010/3020/A4000 ZIDEFS IDE Interface / Mini-Podule & mSATA
Description:
This listing includes a 16GB Innodisk mSATA 3ME disk, IDE to mSATA adaptor and the ZIDEFS mini-podule.
IDE Interface mini-podule (ZIDEFS) suitable for A3000/A3010/A3020/A4000 - provides a 44pin socket for media to IDE adaptors. Requires RISC OS 3.10 or later.
This listing is for the card complete with IDE to mSATA interface and 16GB mSATA Disk partitioned into four 512MB 'drives'. Yes 14GB is unused.
* Support for partitions Master and Slave drives can be fitted
* I2C connector for non-motherboard RTC modules etc.
* Configurable as ZIDEFS, IDEFS or SIDEFS
* Support for partitions Master and Slave drives can be fitted
* I2C connector for non-motherboard RTC modules etc.
* Configurable as ZIDEFS, IDEFS or SIDEFS
Also available with an adaptor for direct connection to SD cards here, or a blank version ideal for spinning drives with no adaptors here.
We recommend mSATA as they are designed for computer filing system type usage whereas SD & CF are designed for cameras so we'd expect a longer life expectancy from mSATA.
For speed test results please see the end of the listing.
Warning
Please note that plugging an interface/adaptor in the wrong way may irreparably damage the podule and/or the computer. The IDE connectors have pin 1 marked to assist orientation.
!HForm is (c) Castle Technology / RISC OS Developments Ltd and is supplied with their kind permission.
A special version of !HForm is used. Copies can be downloaded from our website, emailed or provided on floppy upon request.
Hardware/Schematic capture, design and logic programming (c) Ian Stocks.
Supplied by kind permission of Ian Stocks.
Software (c) John Kortink. Supplied by kind permission of John Kortink
The User Guide & software will be provided via email upon purchase to your registered PayPal address.
Innodisk mSATA 3ME 16GB SSD Flash Drive
Innodisk mSATA 3ME is designed as the standard Mini PCIe form factor with Sata interface, and supports Sata III standard (6.0Gb/s) with excellent performance. The form factor refers to the MO-300 specification which established by JEDEC. Regarding of mechanical interference, Innodisk mSATA 3ME absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier. Innodisk mSATA 3ME effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.
Specification:
Interface: Sata III
MLCP/E cycle: 3,000
Capacity: 16GB.
Channels: 4
Sequential R/W (MB/sec, max.): 460/160Max.
Power Consumption: 1.3W(3.3V x 390 mA )
Thermal Sensor: ST-Optional
External DRAM buffer: -
H/W Write Protect: Optional
ATA Security: YES
S.M.A.R.T.: YES
Dimension: (WxLxH) 29.8X 50.8X 4.4mm
Capacity: 16GB.
Channels: 4
Sequential R/W (MB/sec, max.): 460/160Max.
Power Consumption: 1.3W(3.3V x 390 mA )
Thermal Sensor: ST-Optional
External DRAM buffer: -
H/W Write Protect: Optional
ATA Security: YES
S.M.A.R.T.: YES
Dimension: (WxLxH) 29.8X 50.8X 4.4mm
Environment:
Vibration: 20G @7~2000Hz
Shock: 1500G @ 0.5ms
Storage Temperature: -55°C ~ +95°C
MTBF: 3 million hours.
Vibration: 20G @7~2000Hz
Shock: 1500G @ 0.5ms
Storage Temperature: -55°C ~ +95°C
MTBF: 3 million hours.
ZIDEFS Speed tests:
(carried out using