Select MMA by switching to the MMA welding mode.There is voltage output at both output
terminals. Set the amperage on the machine suitable for the electrode being used.Ensure you
check that you have the electrode polarity correct.
Switch the welding mode to 0.8mm flux core or 1.0mm flux core welding mode based on the wire
you were using.
Rated Input Voltage | 220V±15% 110V±15% |
Input Frequency | 50/60Hz |
Rated Power | 4KV.A |
Rated Input Current | 18.3A |
No-load Voltage | 60V |
Rated Output Current | ARC:20-140A / MIG:30-140A |
Duty Cycle | 35% |
Power Factor | 0.7 |
Efficiency | 85% |
Insulation Class | F |
Protection Class | IP21S |
Welder Weight | 15 LBS |
Packing Size | 15.6*8.3*11 Inches |