Square Size:

180x180mm: for Kingroon KP3S

220x220mm: for Voxelab Aquila c2 x2 s2/ Anet A8/ Wanhao Duplicator i3/ Monoprice Maker

235x235mm: for Ender 3/ Ender 3 S1/ Ender 3 Pro/ Ender 3S/ Ender 3 V2/ CR20/ CR20 Pro/ Ender 5/ Ender 5 Pro

257x257mm: for Bambu Lab X1/P1P

300x300mm: for Kingroon KP5L/ SV04 IDEX/ FYSETC Voron/ Ender 3 S1 Plus/ Ender 3 Max Neo

310x310mm: for Artillery SW X1/ SW-X2/ CR-10/ CR-10S/ Tevo Tornado/ Nereus/ Anet A8 PLus/ E12

350x350mm: for FYSETC Voron 2.4

241x253.8mm: for Prusa i3 MK3S+

In addition to being suitable for the above models, it can also be used for other similar hotbed size models.

If you are not sure about whcih size match your 3d printer, please measure your 3d printer hotbed size !!

Print Instructions:

1. For the first printing, it must be leveled (the distance between the nozzle and the hot bed is generally A4 paper thickness).

2. Tear off the adhesive on the base of the magnetic sticker and stick it on the hot bed platform, pay attention to be flat and do not leave air bubbles.

3. Adsorb the PEI side or the PET side spring steel plate on the magnetic base.（PET has a film ,please tear off the film before use )

4. Start printing, the temperature of the hot bed can be set to 40°C-80°C according to the actual situation (do not exceed 80°C).

5. when the temperature drops to room temperature，take off the printing surface and bend it gently to achieve easy demoulding.


Advantage:

1. Double-sided printing, It is convenient, durable and practical.

2.High temperature resistance, scratch resistance, no deformation.

3.Suits variety of filaments, especially for PLA.

4. Don’t need to use glue, easy to use.

5.Easy to get the first layer even for a new user.

6. Easy to clean, just wipe it off with a wet tissue or alcohol before printing.

7.The soft magnetic base with 3M is not only very magnetic, but also very sticky,which can prevent warping.

8.Spring steel sheetis made of stainless steel, no matter how bent it is, it can return to flat state, good flatness!

9. You only need to bend the PET-PEI with your hands, and the model can be easily demoulded without using other tools.


Kind Tips
1.There is a protective film on PET .Please peel the film before using.
2.PET and PEI must be used with magnet base .Please make sure you already have a magnet base before you
would like to purchase pet-pei without base.
3.After our extensive testing, we recommend PET to print PLA and TPU and PETG.

PEI to print PLA /PETG/PC/ABS /TPU /Nylon etc.