Kleines Set bestehend aus PCB für den Aufbau einer XT-IDE Rev.4 8Bit ISA Controller Karte von Glitchwrks, einem Präzisionssockel und dem benötigten, vorprogrammierten EEPROM AT28C256. ROM Variante bitte bei Bestellung auswählen: PC/XT 8088/8086, PC/XT NEC V20/V30, PC/AT 80286 oder PC/AT 80386.


Lieferumfang:
  • Leiterplatte, schwarz (ENIG)
  • Präzisionssockel, DIP-28
  • programmierter EEPROM AT28C256 (ROM bitte auswählen)

Platinen-Material: FR-4, 1.6mm, ENIG, schwarz

Weitere Informationen, wie z.B. eine Stückliste (BOM) finden Sie auf folgenden Seiten:
https://github.com/glitchwrks/xt_ide
https://www.lo-tech.co.uk/wiki/XTIDE_Universal_BIOS
https://www.minuszerodegrees.net/xtide/rev_4/XT-IDE%20Rev%204%20-%20general.htm

Wenn Sie Fragen zum Aufbau, zögern Sie nicht mich zu kontaktieren und ich antworte Ihnen schnellstmöglich.

Haftungsausschluss:
Der Aufbau der Schaltung erfordert Erfahrung und/oder Fachkenntnisse der Elektronik und im Zusammenbau elektronischer Schaltungen. Die Platine bzw. der Bausatz wurden nach bestem Wissen und Gewissen zusammengestellt, der Aufbau und die Verwendung geschehen jedoch auf eigene Gefahr. Die Haftung auf Schaden­ersatz wegen Verletzungen von Gesundheit, Körper oder Leben und grob fahrlässiger und/oder vorsätzlicher Verletzungen meiner Pflichten als Verkäufer bleibt davon unberührt. Mit dem Kauf nimmt der Käufer diesen Hinweis zur Kenntnis und akzeptiert die Haftungsausschluss-Klausel.

Small set consisting of PCB for the assembly of a XT-IDE Rev.4 8Bit-ISA IDE-controller card by Glitchwrks, a precision IC-socket and the required, programmed EEPROM AT28C256. Please choose appropriate ROM variant depending on system type: PC/XT 8088/8086, PC/XT NEC V20/V30, PC/AT 80286 or PC/AT 80386.


Scope of delivery:
  • PCB, black (ENIG/gold-plated)
  • Precision IC-socket, DIP-28
  • programmed EEPROM AT28C256 (please choose ROM variant)
Material: FR-4, 1.6mm, ENIG, black

Further information e.g. a bill of materials (BOM) can be found on the following sites:
https://github.com/glitchwrks/xt_ide
https://www.lo-tech.co.uk/wiki/XTIDE_Universal_BIOS
https://www.minuszerodegrees.net/xtide/rev_4/XT-IDE%20Rev%204%20-%20general.htm

If you should have any questions regarding the assembly, please don't hesitate to contact me and i will answer you as fast as possible.

Disclaimer:
The assembly of the circuit requires experience and/or special knowledge in electronics and soldering. The PCB or respectively the DIY kit was assembled with the uttermost care and knowledge, but the assembly and the operation of the circuit is at your own risk. The liability for damages due to injury to health, body or life and grossly negligent and / or intentional violations of my obligations as a seller remains unaffected. With the purchase, the buyer acknowledges this notice and accepts this disclaimer.