Product Introduction:
This kind of wind solar hybrid streetlight controller is special design for small off-grid he course of which wind generator and solar panels charge to batteries safely and efficiently.
Built-in Smart Bluetooth device:
The Bluetooth module is directly built into the controller. You do not need to buy additional Bluetooth devices. You only need to turn on the Bluetooth device of your mobile phone and download the mobile APP at the same time to quickly connect to the network system of the controller. Due to the differences between the Android and IOS systems, the device only supports the Android system for the time being, not the IOS system. Our controller APP system can help you check the working conditions of the controller at any time on your mobile phone, such as the voltage of wind energy, solar energy and battery, and help you find out the abnormality of the controller or battery in time. The effective monitoring range of the Bluetooth system is within 200 meters. If your mobile phone is more than 200 meters away from the controller, the mobile phone will not be able to monitor the controller.
Function:
** Wind generator MPPT boost charging function.
** PWM dump load of wind, external dump-load resistance, intelligent disconnection of Solar charging.
** Bluetooth connection function of controller to connect mobile phone APP monitoringdata.
** Dual power supply function: Battery + solar power supply.
** LCD displays parameters such as voltage and current of wind, solar and load .Someparameters can be set by users.
DC output with 3 output modes.
** The inner circuit board of the controller is sprayed with conformal coating to prevent dust, moisture and static electricity.
Features:
** Wind MPPT charging method, ensure the power get max input into the battery and high charging efficiency.
** Can be used for 2000W wind turbines with high compatibility.
** Independent Boost Circuit: The charging efficiency of the low-power vertical wind generator has been solved.
** 12V/24V/48V system auto-detect function.
** Mini size, easy to install.
** LCD display with visible and intuitive parameters.
** Rated wind power: 100-1000W
** PV Rated Power: 100-600W
No-load Current (DC): ≤0.05A
Controller power mode: Battery or solar
Control mode: Wind generator MPPT boost charge、PWM dump load 、 PWM Over current Limiting function.
Communication function (Need to purchase): Bluetooth (connected to the mobile phone APP, the Bluetooth password is 4 digits, which can be viewed on the device when the APP forgets the password.
Output working mode(Mode): Multiple working modes are available: pure light control mode, normally open mode, light control+time control mode (four periods+morning light)(3 modes adjustable)
Display content: LCD display,Voltage, Percentage of battery power, Current, working mode of load, etc.
Protection type: Solar Reversed Charging protectionBattery open circuit protection 、 battery anti-reverse connection protection protection、Over current and over voltage auto brake protection、Over load protection,etc.
Cooling mode: aluminium profiles Heat dissipation and self-cooling.
Working temperature / Relative humidity: -25℃~+80℃ /0~90%,non-condensing.
Net weight / Gross weight: 2.05/2.45kg
Controller size/Pack size: 167mm*145.5mm*61.8mm/360mm*250mm*120mm
Resistance size: 12/24V: 200*60*120mm ; 48V: 210*70*130mm
Package list:
1 * Wind&Solar hybrid charge controller with dunpload.
General Safety Information:
** Before you receive the product, please check it carefully. Make sure the product has not been damaged in transit. If it is damaged, contact the carrier or our company immediately.
** All installation and electrical work may only be carried out by qualified personnel.
** Do not disassemble or attempt to repair the controller without professional guidance.
** Do not use the controller without batteries.
** Do not disconnect the controller and batteries when the controller works normally.
** Keep children away from the controls.
** Do not allow water to get into the controller.
** Ensure power connections are tight to avoid excessive heating from a loose connection. Make sure the cables are appropriate for the system.