Feature:

1. [FOR RADIO EQUIPMENT] Used to measure the matching characteristics of passive and active radio equipment, such as antennas, cables, filters, attenuators, amplifiers, etc.
2. [WIDE FREQUENCY RANGE] 23MHz to 6200MHz wide operating frequency range, full frequency range 0.25 dB and 1.5°, to achieve high accuracy measurement.
3. [3.2IN TOUCH SCREEN] With 3.2in color touch screen, can quickly configure scan parameters and display measurement results, scan speed up to 1000 points/sec.
4. [INDEPENDENT MARK] Ability to display up to 4 independent markers on all graphs for accurate evaluation of measured parameters.
5. [MULTIPLE DISPLAYS] Can display almost all possible reflection coefficient descriptions, measure cable faults and loss distances.
6. [WIDE APPLICATION] The vector network analyzer VNA is very suitable for radio frequency circuit matching and debugging of , WiFi, 2.4G, 5.8G, and GPS.
7. [ALUMINUM ALLOY] The shell is made of aluminum alloy and adopts the form of a mobile automatic instrument, which is light in weight and compact in structure.


Specification:

Item Type: Vector Network Analyzer
Material: Aluminum Alloy
Color: Black
Model: GS-320
Operating Frequency Range: 23-6200MHz
Frequency Resolution: 10kHz
Maximum Scanning Points: 1000
Scanning Speed: 1000 points/sec
Bridge Direction, Uncorrected in the Entire Range: >12dB
Effective Directivity (after Full Single Port Calibration): >50dB
Standing Ratio at the Input: <2
Phase Measurement Accuracy: >1.5 degrees
Amplitude Measurement Accuracy: >0.25dB
Resolution to Determine the Distance to the Fault Point: (C x VF) / 2S m
Measuring Cable Maximum Length: Approx. 3000m / 9842.5ft (VF=1)
Maximum DC Input Voltage: 25V
Display Chart: Smith chart; chart; phase of reflection coefficient; amplitude; logarithmic amplitude; VSWR, fault distance; cable loss
Operating Temperature Range: 0-+40℃
Screen Diagonal: 3.2 inches
Screen Type: Resistive touch
Screen Resolution: 320х240
Battery Capacity: 4000mAh lithium battery(built in battery)
Battery Life: ~4 hours
Battery Charging Time: ~6 hours


Package List:

1 x Network Analyzer

1 x Type-C Data Cable

1 x Touch Screen Pen

1 x SOL Calibration Part

3 x Adapters

1 x English User Manual

  



 

1. Our listing price includes the value of goods,packaging cost,and export taxes,not including international duties.
2. duties,taxes,and charges are not included in the item price or shipping fee.
3. The duties are buyers' responsibility.Please check with your country's customs office determine what these additional costs will be prior to your purchase.
4. All disputes arising from the duties will be submitted to ebay for solution.

 

1. Any questions, pls. contact us via ebay message or email us.We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. post a message again because sometimes our message system may block some emails.

2. If you are satisfied with our service, pls. kindly leave us a positive feedback and give us the Detailed Seller Rating with all "5 " in very area
3. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. 

https://image-us.chengykj.com/upload/third_resource/image/feedback.jpg


We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders. 

https://image-us.chengykj.com/upload/third_resource/image/shipc73.jpg


On 30/03/2024 at 03:30:35 AEDT, seller added the following information:

DataCaciques