Specification:
Type: Automatic Veneer stitching machine
Version: Single glue thread / Double glue thread
Voltage: 220V/110V
Power: 40W
Veneer stitching thickness: 10-100 silk
Weight: 2.5kg
Package Size: 295*170*190mm
Operation method:
A: Insert the power plug and make the machine heat up for 3 minutes.
B: Put the stitching thread into the machine installation ring, and use a small wire needle to pass the hot melt line through the heating tube from the upper end.
C: Before using the machine, put a few drops of detergent solution or sewing machine oil on the sponge next to the cementing wheel at the bottom of the machine, which can effectively prevent the hot melt line from sticking to the cementing wheel.
D: Hold the black handle of the leather stitching machine, align the arrow on the front of the machine to the seam of the veneer to be spliced, so that the cementing wheel and squeeze wheel of the machine press the veneer and push forward. You can see that the heating tube swings regularly. When the gap is large, apply pressure to the extrusion wheel properly, and the splicing will be tight. If the veneer is arranged closely, the pressure of the extrusion roller should be appropriately reduced. By adjusting this force, a beautiful splicing can be spliced.
E: Broken thread, when a piece of splicing is completed, lift the machine about 15cm with your right hand, hold the glue line at the splicing interface, and gently pull it in the opposite direction of splicing-the line will cut off.
What's in Package:
1x Veneer Patchwork Machine
1 or 2 roll x Glue Wire
NOTE:
1.lmport duties, taxes and charges are not included in the item price and the freight. These charges are the buyer's responsibility.
2.Please check with your country's customs to determine what these additional costs will be prior to bidding/buying.
3.Please leave your valid phone number when you make order, otherwise we can't guarantee the package would arrive smoothly.
RETURN:
1.Return accepted in 30 days after you receive the item. The buyer need to affordthe return postage fee who also need to return it to our designated place.
2.Return package must be in the original packaging, item must be in new condition.Missing parts or any damaged by the buyer will not give any return.
3.Within warranty period, all repair parts will be free, but the buyer need to pay for the freight.