Nakamichi used to produced all their own calibration cassettes on ZX machines due to having full manual adjustment control of the azimuth and bias settings. Most machine do not have this option so will not be able to produce as accurate recording due to imperfections of tape travel.
I am able to ensure the perfect azimuth alignment and bias levels for each individual cassette recorded. I also used computer software to give a very accurate level.
The cassettes are also double checked with a sony quartz locked tape deck.
So the tones speeds are very accurate measuring lower than 0.04 wow and flutter.
I have been selling these tapes for over 3 years now with hundreds of happy customers. Please see my feedback.
The tones on the tape are 3000Hz and 3150Hz for speed and wow and flutter tests.
And lots of other tone for setting up tape deck levels.
I have also included some useful channel identification test tracks, white noise and other useful test tracks.
Each track has a description before the tone to help find the tone you want.
Track listing.
3000 Hz tone (0dB)
3150Hz (0dB)
400Hz (0dB)
500Hz (0dB)
1000Hz (0dB)
10,000Hz (-10dB)
12,000Hz (-10dB)
15,000Hz (-10dB)
19,500Hz (-10dB)
Frequency Sweep 20Hz - 20000Hz
400Hz (0dB) @250n Wb/m
Channel Identification
White Noise (0dB)
If you need any other tones please ask as I can add them to the tape.But there will be a small extra charge due to time to set everything up.
To use the tape down load a frequency counter app for your phone.
Play the tape and check the frequency on the app.
If needed adjust the speed of your tape decks motor.
This will be on the back of the motor or a pot on the circuit board.