ACA 500 & 520 Combo 32oz | Body Shop Safe Cutting Compound & Finishing Polish

3D ACA 500 & 520 32oz Kit for fast paint correction. Body shop Safe Compound X-TRA CUT & Finishing Polishing. 
     Safe Time and it done with less product and time 

ACA 500 X-TRA CUT

3D ACA® X-TRA CUT COMPOUND: 500    

VOC BSS ( Body Shop Safe )

3D ACA® 500 X-TRA CUT COMPOUND is infused with ALPHA CERAMIC ALUMINATM, a revolutionary new abrasive that has been formulated to provide high speed, low heat leveling that will correct even the most challenging clear coats and single-stage paint. This precisely engineered compound delivers TRUE PAINT PERFECTION in the absolute shortest amount of time.

3D ACA 500 X-TRA CUT COMPOUND is versatile and aggressive enough to correct the hardest new ceramic clear coats and also works extremely well with soft clears. ACA 500 is water-based, which makes it easy to use, and easy to clean up. Works best when applied in shaded areas but is also sun friendly.

 Directions:

Sand to Desired level of grit. Set buffer speed (3D preferred speed 100-1800 RPMs) Apply enough 3D ACA X-TRA CUT COMPOUND #500 to work a 2' x 2' area using a 3D WOOL PAD (K-WW8). Buff with slow back and forth overlapping motions until the correction is complete and sanding scratches are eliminated. remove any residue with a clean microfiber cloth.

ACA 520 Finishing Polish 


 ACA 520 Finishing Polish Body Shop Safe

3D ACA 520 FINISHING POLISH is the industry’s fastest HOLOGRAM FREE Finishing Polish with ALPHA CERAMIC ALUMINA. This revolutionary NEW WATER base, abrasive polish that has been constructed to provide high speed, low heat, hologram eliminating polishing for the most challenging clear coats and single stage paint.

3D ACA 520 Finishing Polish is the next evolution product performance and finish quality results for the fine-cut polish category in the body shop and car detailing industry.

This new formula requires more time and more complex steps to create the raw materials and process them into the final powder – Alpha Ceramic Alumina or ACA. If you’re new to paint correction chemistry lingo – the word powder refers to the abrasive technology.

Besides the powder, the other important components that result in a compound or polish are the liquids. The liquids are just as important as the powder because it is the liquids that determine how well or how poorly the powder performs in different applications, such as for use with a rotary polisher  and/or for use with an orbital polisher.

Like ALL 3D products, 3D AAT 520 Finishing Polish contains no harsh, harmful solvents nor any OSHA regulated crystalline silica. 3D AAT 520 Finishing Polish is the fastest polish in the industry for producing hologram-free results. This proprietary Alpha Ceramic Alumina powder and the water-based formula reduce heat during the buffing process, offers a super long open time or buffing cycle, zero dusting and easy wipe-off. If you demand the best, then get 3D AAT 520 Finishing Polish.

3D on the outside of the bottle means you can trust the product on the inside of the bottle.

What is it? - A body shop safe, silicone-free, water based premium quality fine-cut polish for use on automotive paints in in body shops environments. Can be used with any rotary or orbital polisher with foam pads.

What does it do? - Quickly removes holograms, fine swirls, fine toweling marks, shallow scratches, water spots and oxidation. Maximizes the distinction of image or D.O.I. appearance quality of a paint finish. Perfectly prepares the paint for wax, sealant, or ceramic coating. 

When do you use it? - After first removing sanding marks with a 3D compound and/or after removing any serious or deep paint defects like swirls, scratches, water spots and oxidation.

Why use 3D ACA 520 Finishing Polish over other options? - The polishing step is the final step to perfect the paint. The results you create during all the steps are important but it’s the final polishing step where your product of choice has the chance to be the hero or the zero. Don’t be a zero… be the hero! Choose 3D AAT 520 Finishing Polish and the results you create will establish your reputation as a true professional in this industry and directly reflect your skill, knowledge, and talent.

3D AAT 520 Finishing Polish consistently delivers customer pleasing results sure to impress everyone. Did I mention it also wipes off easy? The next time you’re shopping for a better polish, make your job easy – choose 3D AAT 520 Finishing Polish.

  • FASTEST fine-cut polish removes holograms, fines swirls and scratches.
  • More correction, more speed and same finish results as 3D AAT
  • Precision engineered proprietary Alpha Ceramic Alumina, (ACA) abrasive technology.
  • Chemically tuned for both hard and soft paints.
  • Finishes out hologram free with rotary polisher and soft foam finishing pad.
  • Works with both rotary and orbital polisher plus foam, microfiber, or wool pads
  • Body shop safe – Fresh paint safe – Silicone free!
  • Does NOT contain OSHA regulated Crystalline Silica! - HUMAN SAFE
  • Water-based – No harsh solvents or foul odors!
  • Wipes off easy! – Won’t clog buffing pads –– Competitive pricing.
  • 3D’s Green Earth Technology – Biodegradable, Prop 65 and V.O.C. compliant.
DIRECTIONS:

After sanding marks have even removed with 3D ACA X-TRA CUT COMPOUND #500, set the buffer to a comfortable speed ( 3D preferred 600- 1200 RPM's). Apply enough 3D ACA FINISHING POLISH#520 to work a 2' x 2' area using a 3D Spider-Cut FINISHING FOAM PADS (K-58SBK). Polish with show back and forth overlapping motions, keeping the pad's surface flat with the vehicle until all holograms, swirls or wheel marks are removed. Remove the remaining residue with a clean microfiber cloth to reveal TRUE PAINT CORRECTION.

 

What did Hot Wax Garage choose 3D for our paint correction product line?

 Hot Wax Garage, we took our time to choose a top-quality paint correction product line. The importance of choosing the right paint correction brand is a top priority. There are too many brands out there and so much hype on the internet. Big companies influence their installers and techs to buy products made by their sister companies, claiming they are the best products for the job; thereby making a simple task not so simple. Any brand can look like a miracle worker on social media.

Hot Wax Garage was on a mission for over 3 years to survey the old-fashioned way; face-to-face with people who did the work and used paint correction products. We did not google and search the internet, where you always hear how great the sponsored product is, but instead by random, unplanned questions and conversations with techs and owners of body and detail shops who had no affiliations or obligations with any major branded companies. The name 3D kept coming up as a great product to work with.

We are not following any trends or watching sales on any major selling platforms or any other websites. Hot Wax Garage wanted to get behind products that we can feel good about selling, knowing we are selling top-notch products. We understand the frustration of buying hyped up products. We have been detailing cars for over 35 years and want to bring the best products to you, saving you time and money. Just as important is feeling confident you are using a top-quality product.  3D closed the gap between body and detail shops where both can use the same product line, 3D, to accomplish a showroom or show car finish, if desired.

Most Other Brands:

3D:

3D products are made for the Automotive Paint Resurfacing Professionals and easy to use for any Car Enthusiast who enjoys the Art of Detailing.

HOT WAX GARAGE “ Detailers Supporting Detailers “ and we Roll with 3D