Features:
▶ Strong Compatibility: Sonic Pad can connect to almost any 3D printer on the market via a USB cable. Besides, it has been pre-configured for Ender-3 V2, Ender-3 , and Ender-3 , so you can get it going in seconds.
▶ Highly Integrated with Strong Computing : Beneath the large 7-inch control screen, the firmware runs in full swing on a powerful 64-bit computing platform. With software-hardware integration, you will get stunning performance, but with less trouble.
▶ Serial Cable for More Stable Connection: Using a serial cable to connect to the printer can effectively reduce AC interference and improve system stability. Compatible models including Ender-3 V2, Ender-3 V2 , Ender-3 , Ender-3 , Ender-3 , Ender-5 Plus, etc.
▶ Multi-printer Control & Batch Printing: Sonic Pad can control to 4 printers at the same . Control multiple machines with screen, supports batch printing, and easy to use with . You can realize multiple printers are printing the same model simultaneously with control.
▶ Printing: Sonic Pad uses -oriented algorithms to command the motors for higher printing .
▶ Deft with User-defined Macros: Supports user-defined programmable macros, with each macro combining a series of commands to a specific function for higher efficiency.
▶ Rich Extensible Interfaces: USB port x 4, a RJ45 port and a module are included. When a is added, it can realize real- and -lapse filming. Connect USB keyboard and for more convenient control.
Cloud Control: This function is for models like Ender-3V2, Ender-6, CR-6SE, CR-10 ,Ender-3 , Ender-3 , Ender-3 Plus,Ender-3 , Ender-5 . The above printers support slicing and - printing on the sonic pad screen.
▶ Multiple Platforms : Sonic Pad can be operated either by the built-in touchscreen or remotely from the UIwhen connected to a LAN. Enjoy the of control.
Specification:
Model: S-Pad 01
Compatible Models: Compatible models: Ender-3 V2, Ender-3 V2 , Ender-3 , Ender-3 , Ender-3 , Ender-5 Plus, Ender-3 Max, Ender-3 Plus, CR- 10 , CR-1OS V2, CR-10 V3, Ender-5 , Ender-5 , Ender-6, Ender-7, Ender-3 Max , CR-10, CR-10 S4, CR-10 S5, CR-10 V2, CR-10 , CR-6 MAX, CR-6 SE, CR-2O0B, CR-3O, Sermoon D1, Ender-2 , CR-, Ender-3 , SR, , , MK3S+
Size: 22.2 x 12.8 x 4cm
SoC: CrealityT800
SoC Data Bus Width: 64-bit
RAM: 2G
ROM: 8G
Standard: 802.11b/g/n
USB Port: USB 2.0 x 4
LAN Port: RJ45 x1 (100Mbps)
Interface: 1
Rated Voltage:
Display Type: IPS
Display Size: 7 inches
Display Resolution: 1024x600
Multi-: Yes
Speaker: Yes
: Yes
Support 8 languages: including Chinese, English, Japanese, German, French, Portuguese, Spanish, Italian
Package Size: 28 x 24 x 6cm/11 x 9.4 x 2.3in
Package Weight: 1412g/49.8oz
Packing List:
1 x Sonic Pad
1 x (Including )
1 x G-sensor1*USB Cable
1 x USB Drive
1 x -USB to -USB Connector
1 x -USB to Type-C Connector
1 x Instructions
1 x Screw (2* *8 Self-tapping Screw, 2* *8 Machine Screw, 2* *6 Machine Screw)
▶ Strong Compatibility: Sonic Pad can connect to almost any 3D printer on the market via a USB cable. Besides, it has been pre-configured for Ender-3 V2, Ender-3 , and Ender-3 , so you can get it going in seconds.
▶ Highly Integrated with Strong Computing : Beneath the large 7-inch control screen, the firmware runs in full swing on a powerful 64-bit computing platform. With software-hardware integration, you will get stunning performance, but with less trouble.
▶ Serial Cable for More Stable Connection: Using a serial cable to connect to the printer can effectively reduce AC interference and improve system stability. Compatible models including Ender-3 V2, Ender-3 V2 , Ender-3 , Ender-3 , Ender-3 , Ender-5 Plus, etc.
▶ Multi-printer Control & Batch Printing: Sonic Pad can control to 4 printers at the same . Control multiple machines with screen, supports batch printing, and easy to use with . You can realize multiple printers are printing the same model simultaneously with control.
▶ Printing: Sonic Pad uses -oriented algorithms to command the motors for higher printing .
▶ Deft with User-defined Macros: Supports user-defined programmable macros, with each macro combining a series of commands to a specific function for higher efficiency.
▶ Rich Extensible Interfaces: USB port x 4, a RJ45 port and a module are included. When a is added, it can realize real- and -lapse filming. Connect USB keyboard and for more convenient control.
Cloud Control: This function is for models like Ender-3V2, Ender-6, CR-6SE, CR-10 ,Ender-3 , Ender-3 , Ender-3 Plus,Ender-3 , Ender-5 . The above printers support slicing and - printing on the sonic pad screen.
▶ Multiple Platforms : Sonic Pad can be operated either by the built-in touchscreen or remotely from the UIwhen connected to a LAN. Enjoy the of control.
Specification:
Model: S-Pad 01
Compatible Models: Compatible models: Ender-3 V2, Ender-3 V2 , Ender-3 , Ender-3 , Ender-3 , Ender-5 Plus, Ender-3 Max, Ender-3 Plus, CR- 10 , CR-1OS V2, CR-10 V3, Ender-5 , Ender-5 , Ender-6, Ender-7, Ender-3 Max , CR-10, CR-10 S4, CR-10 S5, CR-10 V2, CR-10 , CR-6 MAX, CR-6 SE, CR-2O0B, CR-3O, Sermoon D1, Ender-2 , CR-, Ender-3 , SR, , , MK3S+
Size: 22.2 x 12.8 x 4cm
SoC: CrealityT800
SoC Data Bus Width: 64-bit
RAM: 2G
ROM: 8G
Standard: 802.11b/g/n
USB Port: USB 2.0 x 4
LAN Port: RJ45 x1 (100Mbps)
Interface: 1
Rated Voltage:
Display Type: IPS
Display Size: 7 inches
Display Resolution: 1024x600
Multi-: Yes
Speaker: Yes
: Yes
Support 8 languages: including Chinese, English, Japanese, German, French, Portuguese, Spanish, Italian
Package Size: 28 x 24 x 6cm/11 x 9.4 x 2.3in
Package Weight: 1412g/49.8oz
Packing List:
1 x Sonic Pad
1 x (Including )
1 x G-sensor1*USB Cable
1 x USB Drive
1 x -USB to -USB Connector
1 x -USB to Type-C Connector
1 x Instructions
1 x Screw (2* *8 Self-tapping Screw, 2* *8 Machine Screw, 2* *6 Machine Screw)