A: The item price or the shipping cost is not including the customs duties, taxes and charges. These fee are the buyer's responsibility.
B: About the taxes rate, it depends on the local customs taxes policy. You can check with your country's customs offical website or local customs office to know how much the additional taxes will cost. Thanks for your cooperation!
Principle
Cooling Lipolysis: Is a new non-invasive way to gently and effectively reduce fat in targeted areas of the body. As triglyceride in fats will be converted into solid in particular low temperatures, it uses advanced cooling technology to selectively target fat bulges and eliminate fat cells through a gradual process that does not harm the surrounding tissues, reduce unwanted fat. A number of methods have been attempted for lipolysis including the use of laser, ultrasound, and radiofrequency electric current, since cryo was developed appling cooling to tissue, was approved as the most effective way to fat reduction. This revolutionary new idea of dissolving fat, which is approved as an important technology progress in fat reduction since it is put into use.
Cavitation: Use the strong tremor caused by the strong ultrasonic wave, this can bump the fatty cell, stimulate it, and burn them inside the skin about 5cm, thus can completely smash the fat cells, and use healthy and scientific slimming therapy and dieting adjustment, thus can release excrescent water and toxin, dissolve the inner deep fat.
RF: Radio frequency treatment is a radio frequency waves through a probe to contact with skin, conduction of energy deep into the skin. This deep heating operations can contribute to balanced structure and subcutaneous tissue of the skin immediately tightens, instant wrinkle effect occurs. Heated skin Dermis while stimulating collagen regeneration, to gradually restore skin elasticity, achieve the goal of long-term reduction of wrinkles. the RF is acting on the dermal layer of the skin, which can be effectively and permanently restore the elasticity of the skin.
Function
* Face beauty wrinkles removal
* Face lifting face tighten skin rejuvenation
* Body shaping body beauty
* Fat melting fat removal fat break
* Body slimming
Advantage
1. Innovative:
Avoid some trouble steps of filling water, and no worries about the water pipe breaks.
Because the traditional criolipolisis machine needs to be filled water to make cool, so there is a water tank inside the machine, if the machine works under 0℃, it needs the anti-freezing solution and it makes some risks that makes the tank break suddenly. Once tank breaks, the machine will stop working totally and even hard to fix such a big machine.
2. Portable and Convenient:
Only 2kg and 19.6X12.7X24.6cm: the smallest fat frozen machine in the world.
Air cooling, no water tank, no water pipe. No matter where or when you are, when plug it in the power, it makes cold. ----more convenient and faster.
3. 360 All-sided Cooling & Heating both with temp control:
Max cooling temperature -16℃ and max heating temperature 48℃, both equipped with strong 90KPa suction.
4. Comfortable:
Soft silicone replacement heads---softer and comfortable and better closer to the skin, offer a better treatment feelings. Equipped with 3 soft silicone of different shapes for different body parts. Other cool lipolysis machines are with hard silicone, whose fit and comfort are not as good as soft one.
Type 1: Curved one for abdomen ,hip or more rounded abdomen.
Type 2: Peak shape one for arm,leg etc.
Type 3: Flat shape one thigh and waist etc.
Why does the cryotherapy machine need heating function?
According to clinical medicine parameter, there are 3 stages of cryotherapy division:
1. Warming up.
2. Through a controllable and selective cooling process, makes the average temperature of the fat cells are under 10°C after the cooling process within the specified time, and we can observe the crystallization of fat cells at this stage.
3. A more rapid crystal cell reorganization process can be observed during this reheating stage, also some vacuoles composed of residual fat cells are produced at the same time.
After treatment, because of the alternation of heating and cooling, some damaged fat cells will disappear within few days, and other fat cells will gradually disappear within couple weeks.
The final result is that the subcutaneous fat layer is decreased, and the fat cells are gradually decomposed to death. So working with alternational of heating and cooling will have a better result than only cooling.
References
Ingargiola, Michael J; Motakef, Saba; Chung, Michael T; Vasconez, Henry C; Sasaki, Gordon H. Less.. Cool lipolysis for Fat Reduction and Body Contouring: Safety and Efficacy of Current Treatment Paradigms. Plastic & Reconstructive Surgery. 135(6):1581-1590, June 2015
Mulholland RS, Paul MD, Chalfoun C.. Noninvasive body contouring with radiofrequency, ultrasound, Cool lipolysis, and low-level laser therapy. Clin Plast Surg. 2011;38:503–520
Vii Boey GE, Wasilenchuk JL.. Enhanced clinical outcome with manual massage following Cool lipolysis treatment: A 4-month study of safety and efficacy. Lasers Surg Med. 2014;46:20–26
Shek SY, Chan NP, Chan HH.. Non-invasive Cool lipolysis for body contouring in Chinese: A first commercial experience. Lasers Surg Med. 2012;44:125–130
Bernstein EF.. Longitudinal evaluation of Cool lipolysis efficacy: Two case studies. J Cosmet Dermatol. 2013;12:149–152
Ferraro GA, De Francesco F, Cataldo C, Rossano F, Nicoletti G, D' Andrea F.. Synergistic effects of Cool lipolysis and shock waves for noninvasive body contouring. Aesthetic Plast Surg. 2012;36:666–679
In vacuum state, the comparison of temperature of adsorbed pearl cotton:
Allsided Cool air-cooled portable cryo slimming device VS Korean brand of vertical large water-cooled cryo device
At the same room temperature of 20-21℃, as shown in Figure 1;
Count backwards from 70 minutes and after about half a minute, the temperature of both devices is 23°C, as shown in Figure 2;
After more than 7 minutes, the temperature of Allsided Cool is 5°C, while that of another device is 6°C, as shown in Figure 3;
After more than 22 minutes, the temperature of Allsided Cool is -11.1°C, while that of another device is -11°C, as shown in Figure 4;
After more than 33 minutes, Allsided Cool had a temperature of -15°C, while the other device had a temperature of -12°C, as shown in figure 5;
When more than 36 minutes passed, Allsided cool's temperature was -17.2°C, the temperature of the other device was -11°C, as shown in Figure 6.
Summary: Tested on pearl cotton in vacuum state for a total of 70 minutes, after 37 minutes, the lowest temperature of Korean vertical device was -11°C, ours was -17°C, which is 6°C lower than the Korean one.
Real clinical test comparison:
Allsided Cool air-cooled portable cryo slimming device VS Korean brand of vertical large water-cooled cryo device.
At the same room temperature of 20-21°C, as shown in Figure 1, count backwards from 70 minutes, after 21 minutes of clinical test comparisons with two devices on one person at the same time.
Allsided Cool has a temperature of -9°C, while the other device has a temperature of -8°C, as shown in Figure 4.
Summary: After total 70 minutes, the temperature of our device is 1°C lower than the Korean vertical one.
Product Details
Accessories Details
