eBay

Product Description

Package Included
1*Rolling Mill Machine
1*English Manual
All Accessories for Assembly


3 IN 1 Rolling Mile Consists of two smooth, highly polished, hardened steel rolls, mounted in the housing parallel to each other Designed to produce thinner sheet metal and wire gauges, create round grooves and square grooves of different specifications. Half of the roll is smooth(for sheet metal) and half is grooved (for wire).	Handle adjustment gear The pinion drives the oversized gear to save effort and makes the pressed metal flakes more even. The distance between rollers can be easily adjusted by the top gears. Reduction gear ratio of 4:1 allows the rollers to make one complete turn for every four turns of the rolling mill handle.	Heavy-Duty & Stable With forged handle, simple and convenient to use. Easily mounts the rolling mill to your workbench using the mounting holes. The outer 3 mm of the rolls are hardened to around 60 HRC for superior deformation resistance. All powder-coated body for superior corrosion protection and appearance.


Safe to Use The long crank with a cast iron body part and a slip-resistance ABS grip allows for even force application and effortless, smooth use.	Sturdy and Durable This rolling mill machine is made of 55HRC steel rollers with heat treatment process and has a high-quality cast iron hand crank and A3 steel frame with spray paint, which is not easy to deform after long-term use.	Low Noise Double-sided gears are designed to have a good noise-reduction effect and create a quiet working environment for you.

first of all, please fix the machine on a firm object (figure 6)
then install rocker (FIG. 1)
Rotate the two drum balancing gears to the bottom at the same time (FIG. 3)
Install lifting drum gear (FIG. 2)
Remember to inject lubricating oil before using the machine. Lubricating oil must be injected wherever there is a transmission (FIG. 4) (lubricating oil must be injected on both sides of the injection holes marked in the picture)
After the above steps are completed, it can be processed and used on the roller (figure 5)