Notice:
Different options include different packages(as the picture show)
Free Gift:Cross screwdriver * 1pcs.
Attention Please:
Every parcel only get 1 pcs cross screwdriver as a free gift whatever how many you order.
About the DC 12V 3CH Transmitter: Operating frequency: 433.92MHz Power by 3V Coin Cell Button Battery (Battery included ), Material: PVC. Button: 3 buttons Size: 59mm x 28mm x 8mm; Operating voltage: 3V ; Operating Current: 12mA Transmitting power: 10mw Modulation mode: ASK (AM). Encoding type: Learning. Transfers distance: 80m
| |
Technical Data: Input Power:AC 85V-250V Standby Current:<5MA RF Frequency: 433M RF working mode:superheterodyne Receive sensitivity: >97dbm Transmitting distance: 20-50m ( open space) Decoding mode: software decoding Remote storage:25pcs Support remote type: Learning code 1527code, Fixed code(Rolling code can be design) Working mode:Momentary, Toggle, Latching Wiring type:fixed termina Dimension of PCB:53.8*31.2mm. |
About Working mode:
Momentary:Push the remote button , the relay connects, release the remote button , the relay dis-connects.
Toggle:Push once the remote button , the relay connects , push twice the remote button , the relay dis-connects .
Latching:Push the remote button A, the relay connects, push the remote button B, the relay dis-connect.
Clearing the code :
Push the learning button on the receivers for 8 times , the codes will be cleaned .
After clearning the code, all the remote control cannot work any more.
Learning the code :(momentary)
Push the learning key on the receiver once time, it comes into momentary setting mode .
Wait for a moment , the LED will be off , it comes into learning state .
Push the remote button , LED indicator on the receiver board will flash then come off .
After 3 seconds, the LED indicator will be on again , learning successfully .
Learning the code : ( Toggle )
Push the learning key on the receiver twice time , it comes into toggle setting mode
Wait for a moment , the LED will be off , it comes into learning state .
Push the remote button,LED indicator on the receiver board will flash then come off.
After 3 seconds , the LED indicator will be on again , learning successfully .
Learning the code :( Latching )
Note: When you choose for latching mode , in order to learn more remote control , you need to learn two different button , the first time learnt is for “ON”, the second time learnt for “OFF”.
For example : button A = ON , button B = OFF
Push the learning key on the receiver triple time , the LED (on the Receiver)will blink 3 times. When the LED is on, press the button of the remote control(You want to let it learn), Push the remote button A, LED flash for 3 times . Push the remote button B, Led flash for 3 times . After 3 seconds , the LED indicator will be off , Learning to succeed.
A = ON , B = OFF .
What's More: The system can store for 25 pcs of remotes , if the remote get more than 25 pcs , the initial remote control will be lost .