The model in the photo is the model on sale

This authentic FENDER neckTELECASTER ® vintage style is manufactured in our factory in Ensenada, Mexico. It features a very comfortable “Vintage C” profile and a 7.25” (184 mm) radius maple fingerboard with 21 vintage-style frets.

The synthetic bone Slotted nut is pre-cut; These pilot grooves make it easier to space the strings during final filing. Finally, a varnished finish offers a vintage feel. This replacement neck is the ideal solution to find on your Tele the authentic feel of the models from the 1950s.

This replacement neck is compatible with FENDERSQUIER ® byFENDER .

FENDER replacement necks have never been attached to the instrument bodies, so the Slotted nut grooves must be cut by qualified personnel. Additional installation procedures may be required, such as fretting, inserting the neck into the cavity, and other instrument setup steps. You can have your replacement neck installed at your local FMIC Approved Maintenance Center. You can find the addresses of Authorized Maintenance Centers near you in the “Support” section of FENDER .

Features

  • Maple fingerboard with a radius of 7.25 (184 mm)
  • Vintage C 21-fret vintage-style neck profile
  • Slotted nut pre-cut synthetic bone head
  • Varnished finish
  • Vintage-style neck adjustment rod
  • Fingerboard Radius
    7.25 (184.1mm)
  • Scale Length
    25.5 (64.77cm)
  • Nut Width
    1,650 (42mm)
  • Number of Freights
    21
  • Fret Size
    Vintage-Style
  • Headstock Thickness
    .540 (13.71mm)
  • Neck Thickness
    1st Fret - .860 (21.84 mm), 12th Fret - .919 (23.34 mm)
  • Peg Hole Diameter
    .358” (9.09 mm)
  • Fingerboard Material
    Maple
  • Neck Material
    neck maple
  • Nut Material
    Slotted nut synthetic bone
  • Position Inlays
    Black dots
  • Neck Finish
    Gloss Nitrocellulose Lacquer
  • Truss Rod Nut
    Vintage-Style Slotted
  • Truss rod
    Vintage-Style Heel Adjust

This authentic FENDER neckTELECASTER ® vintage style is manufactured in our factory in Ensenada, Mexico. It features a very comfortable “Vintage C” profile and a 7.25” (184 mm) radius maple fingerboard with 21 vintage-style frets. The synthetic bone Slotted nut is pre-cut; These pilot grooves make it easier to space the strings during final filing. Finally, a varnished finish offers a vintage feel. This replacement neck is the ideal solution to find on your Tele the authentic feel of the models from the 1950s. FENDER replacement necks have never been attached to the instrument bodies, so the Slotted nut grooves must be cut by qualified personnel. Additional installation procedures may be required, such as fretting, inserting the neck into the cavity, and other instrument setup steps. You c