Receiver module:
Model: RX480E-4
Working voltage: DC2.5V-5V
Working current: 3MA
Sensitivity: -108DBM
Rate: MAX 10KB / S.
Working mode: point movement, self-locking, interlocking
Output: The 4-channel CMOS level signal corresponds to the remote control ABCD 4 button.

How to match the transmitter and receiver:
1. Delete existing data: press the Learn button (on the receiver) 8 times. Response: The LED flashes 7 times.
2. Learn remote code: Press the Learn button (on the receiver) once, twice or three times (see below).
The LED lights up: the learning mode is active. Press any button on the remote control.
The LED flashes three times: the study is successfully completed.
3. Test: After the above operation, the receiving board can be controlled by the remote controller.
Starting with step 2, more transmitters with different IDs can be additionally learned and stored.
Different modes can be mixed.

Button usage (set mode and start the pairing process):
Press once: jog mode (instantaneous mode)
Press twice: self-lock mode (4-channel switching mode)
Press three times: Interlock mode (the selected channel is activated and cleared if another channel is activated)

Packing: 1Pc