600X digital electronic microscope camera with LCD display 3.5 inch video USB microscope magnifier HD 200W pixels
Specifications:
Digital Microscope with LCD screen |
|
ITEM |
DESCRIPTION |
Model NO. |
HPS001 |
screen size |
3.5 inches |
Image photoreceptor |
1/6.5'' VGA CMOS Image Sensor |
Video Resolution |
720P VGA |
Camera resolution |
3M 2M 1.3M VGA |
Data Format |
MJPG |
Focus mode |
Manually |
Image Format |
JPG |
Video Format |
AVI |
Magnification |
600 |
light source |
Eight leds |
battery capacity |
800mA |
operating hours |
3h |
Charging time |
3h |
Lens Construction |
2G |
aperture |
F4.5 |
Camera angle |
16 degree |
power input |
USB5V |
Signal transmission |
USB |
Operating temperature |
-10C to +50C |
Functions:
Micro USB charging port:
When the device battery is low, connect the charger to charge the device, in the charging process does not recommend the use of the device (the device will reduce the battery life).
Using a USB connection with the terminal signal line to enter the PC camera mode or a hard disk memory mode.
Reset:Boot mode, with a pointed object into the hole, pressing this key, the device is turned off.
TF card socket:Maximum support 32G.
OK button:The boot mode, long press to enter memory, view photos and video, but also store information exit through long press. After entering the menu, you can press this to confirm the selection member.
Left selection key:When taking pictures, press members can be digitally enlarged. When entering a menu or store information, through this key to switch between different options.
M button: The boot mode, long press this button to bring up or hide the "十". Short press this button to bring up and exit menu.
Right selection button:When taking pictures, press members can digitally zoom out. When entering a menu or store information, through which you can switch between different options.
On/off button:Shutdown state, long press member, the device is turned. The boot state, long press the device off. Equipment is running, press this button, you can adjust the brightness of the LED lights.
Camera button:Normal operation of equipment, through the short press this button to take photos. Long press this button to enter the video, through the short press this button to exit the video.
Focus adjustment wheel:Taking pictures or video, rotate the wheel can adjust the focal length, focusing on filming objects
LED light source:Brightness control buttons can be adjusted to its brightness, the light source with four levels, from dark to bright cycle adjustment, until closing, the darkest by default on startup.
Introduction and use interface
Through the long press switch machine is powered.
Information storage interface.
Long press OK to access memory.
As shown, the storage of information including pictures and video information. By left and right selection keys between different photo and video switching.
Menu interface
Short press M key to enter the menu interface.