Dental Investment Vibrator 4" Round Shaker Oscillator Lab Equipment
This variable-intensity model vibrator is ideal for mixing plaster/gypsum, pouring models, and investing. Quiet, powerful, and highly durable, this is the perfect tool for any dentist! It comes brand new in original factory packagin and is covered by a one year warranty.
Specifications:
Voltage: AC110V/50Hz ±10%
Dimensions: 14x15x11cm Blue(Round)
This variable-intensity model vibrator is ideal for mixing plaster gypsum, pouring models, and investing. Quiet, powerful, and highly durable, this is the perfect tool for any dentist! It comes brand new in original factory packagin and is covered by a one year warranty.Specifications: Voltage
110V/60Hz ±10% Power
100W Dimensions
14x15x11cm
Gray(Square)
Description: • This is a big power, high efficiency vibrator, the unique design of heat radiation base make it always work in long time.
• It has two grades, weak grade, strong grade, can be changed as necessary.
• Before power on, put the switch in the middle part “O”, and then power on, turn on the switch (the indicator light comes on), and choose the strong grade or weak grade, finally turn on the switch two or switch one, it starts to work.
Specifications:
Voltage: 110V/60Hz+-10%
Power: 120W
Maximum load:<=2KG
Dimension: 20.5×15.5×10cm (Inner packing size)
Package Including:
1x New JT-51B Small Square Dental Vibrator 
1.Basic Structure The vibrator is mainly composed of pedestal and vibrator plate. It is also installed the knot for adjusting the intensity of the vibration.
2.Operation Steps
After connecting the power, put the plastic model on the plate, and turn on the adjusting knob. Clockwise direction is to increase the intensity of vibration. Counterclockwise is to reduce the intensity of vibration. Turn off the knob to stop the vibration after the model finishes vibration processing. Then take it off for use.
3.Notices
Guarantee the ground line of the power is working. While vibrating, do not adjust the knob very fast. Adjust it slowly from small intensity to large intensity or gradually from large intensity to small intensity. Cut off the power when finish. Wash the surface of the machine frequently to keep clean, so as to extend the service life.
Product Name
Voltage
Electric current
power
Square plaster
110V，60HZ
1A/2A
130W
Statement (FDA, ARTG)The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
If the item is subject to FDA regulation,
I will verify your status as an authorized purchaser of this item before shipping of the item.
If you have questions about legal obligations regarding sales of medical devices,
you should consult with the FDA's Center for Devices and Radiological Health:
https://www.fda.gov/cdrh/devadvice/
https://www.fda.gov/cdrh/industry/support/index.html
Thank you for your cooperation.
This variable-intensity model vibrator is ideal for mixing plaster gypsum, pouring models, and investing. Quiet, powerful, and highly durable, this is the perfect tool for any dentist! It comes brand new in original factory packagin and is covered by a one year warranty.Specifications: Voltage
110V/60Hz ±10% Power
100W Dimensions
14x15x11cm
Gray(Square)
Description: • This is a big power, high efficiency vibrator, the unique design of heat radiation base make it always work in long time.
• It has two grades, weak grade, strong grade, can be changed as necessary.
• Before power on, put the switch in the middle part “O”, and then power on, turn on the switch (the indicator light comes on), and choose the strong grade or weak grade, finally turn on the switch two or switch one, it starts to work.
Specifications:
Voltage: 110V/60Hz+-10%
Power: 120W
Maximum load:<=2KG
Dimension: 20.5×15.5×10cm (Inner packing size)
Package Including:
1x New JT-51B Small Square Dental Vibrator 1.Basic Structure The vibrator is mainly composed of pedestal and vibrator plate. It is also installed the knot for adjusting the intensity of the vibration.
2.Operation Steps
After connecting the power, put the plastic model on the plate, and turn on the adjusting knob. Clockwise direction is to increase the intensity of vibration. Counterclockwise is to reduce the intensity of vibration. Turn off the knob to stop the vibration after the model finishes vibration processing. Then take it off for use.
3.Notices
Guarantee the ground line of the power is working. While vibrating, do not adjust the knob very fast. Adjust it slowly from small intensity to large intensity or gradually from large intensity to small intensity. Cut off the power when finish. Wash the surface of the machine frequently to keep clean, so as to extend the service life.
Product Name
Voltage
Electric current
power
Square plaster
110V，60HZ
1A/2A
130W
Statement (FDA, ARTG)The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
If the item is subject to FDA regulation,
I will verify your status as an authorized purchaser of this item before shipping of the item.
If you have questions about legal obligations regarding sales of medical devices,
you should consult with the FDA's Center for Devices and Radiological Health:
https://www.fda.gov/cdrh/devadvice/
https://www.fda.gov/cdrh/industry/support/index.html
Thank you for your cooperation.
| Voltage | 110V/60Hz ±10% |
| Power | 100W |
| Dimensions | 14x15x11cm |
• It has two grades, weak grade, strong grade, can be changed as necessary.
• Before power on, put the switch in the middle part “O”, and then power on, turn on the switch (the indicator light comes on), and choose the strong grade or weak grade, finally turn on the switch two or switch one, it starts to work.
Specifications:
Voltage: 110V/60Hz+-10%
Power: 120W
Maximum load:<=2KG
Dimension: 20.5×15.5×10cm (Inner packing size)
Package Including:
1x New JT-51B Small Square Dental Vibrator
The vibrator is mainly composed of pedestal and vibrator plate. It is also installed the knot for adjusting the intensity of the vibration.
2.Operation Steps
After connecting the power, put the plastic model on the plate, and turn on the adjusting knob. Clockwise direction is to increase the intensity of vibration. Counterclockwise is to reduce the intensity of vibration. Turn off the knob to stop the vibration after the model finishes vibration processing. Then take it off for use.
3.Notices
Guarantee the ground line of the power is working. While vibrating, do not adjust the knob very fast. Adjust it slowly from small intensity to large intensity or gradually from large intensity to small intensity. Cut off the power when finish. Wash the surface of the machine frequently to keep clean, so as to extend the service life.
Product Name | Voltage | Electric current | power |
|
Square plaster | 110V，60HZ | 1A/2A | 130W |
|
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
If the item is subject to FDA regulation,
I will verify your status as an authorized purchaser of this item before shipping of the item.
If you have questions about legal obligations regarding sales of medical devices,
you should consult with the FDA's Center for Devices and Radiological Health:
https://www.fda.gov/cdrh/devadvice/
https://www.fda.gov/cdrh/industry/support/index.html
Thank you for your cooperation.
