• Please read the attached instruction manual completely before use. And pay particular attention to the safety instructions included. 
• Please add gear oil to the gears before using the motor and replace gear oil after the run-in period(10 hours).(If you do not know how to handle this, please contact us). Our outboard motor doesn't with oil of gear, please prepare it by yourself.
• Do not touch or remove electrical parts when starting or during operation. Keep hands, hair, and clothes away from the flywheel and other rotating parts while the engine is running.
• Please don't start the motor on the bank. If you want to test the motor, it should be done in the river. Please don't use the motor when it stops coming out of water.
• When there is no water coming out of the motor, please stop using it immediately, and then check whether the pump impeller or the water outlet is blocked.
• We can only provide Ce certification, no other certification can be provided, thank you for your understanding.
• Clean the outboard engine with fresh water after sailing in seawater or turbid water. Do not leave the outboard engine out until the cooling water is completely used up. Otherwise, the water cam will enter the cylinder through the exhaust port. This will cause engine failure.
• Use up the gasoline in the fuel tank before storing for a long time. The engine should be stored in a dry and well-ventilated place, avoiding direct exposure to sunlight.
• Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.

• Please note that this product must be started in water, and it is not allowed to start the engine on shore.
• Please note that the two-stroke outboard engine must use a mixture of gasoline and two-stroke engine oil. In addition, gasoline and oil must be premixed and stirred evenly before being poured into the tank.
• Please note that the running-in period is about 10 hours or one month. During the running-in period, do not drive with a high throttle.
• The volume ratio of gasoline to oil during the running-in period of the new engine is 25:1. After the running-in period, the volume ratio of gasoline to oil is 50:1.
• Replace the gear oil after the running-in period, and the second replacement time is after 100 hours or about 6 months;
• When the outboard motor is started, loosen the exhaust screw on the fuel tank cover counterclockwise. The emergency flameout rope shall be inserted, and the other end shall be placed on the wrist or belt.
• When the motor has no water outlet, please stop using it immediately, and then check the water pump impeller or check whether the water outlet is blocked.
• Please note that the exact speed of travel depends on the shape of your boat, weight, water, wind, and other factors.
• Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.

Description

Have you encountered any difficulties in venturing into long-distance deep water? An outboard motor that can handle various complex water conditions can provide you with assistance! The powerful 18-horsepower two-stroke engine allows you to overcome obstacles in various environmental waters and quickly reach the places you need to go with excellent speed. The large-capacity fuel tank also eliminates the hassle of frequent refueling. With its companionship, you can fully enjoy the pleasure of sailing and become a reckless captain!

Key Features

Fast & Powerful: A 2-stroke engine with a maximum output of 13.2kW and 18hp, and a maximum speed of 5500rpm, provides you with unparalleled speed. The streamlined design of a 8'' three-blade propeller can reduce water resistance and provide stronger power during operation.

Selected Material: Lightweight and sturdy aluminum alloy, combined with spray painting technology, provides excellent corrosion resistance, wear resistance, heat resistance, shock resistance, deformation resistance, and other properties. You can use it with confidence in fresh water and salt water.

Easy to Operate: The throttle lever directly controls acceleration and steering. The step-less speed regulation allow you to easily adjust the running speed, combined with simple gear shifting (forward, neutral, or reverse), bringing you a more comfortable and convenient user experience.

Low Noise: The large muffler above can isolate most of the noise, making the sound of the machine running around 80 decibels, allowing you to hear other movements on the water and remain vigilant.

Large Fuel Tank & Fuel-efficient: The external fuel tank of the motor can hold 6.34 gallons of fuel, supporting long-term operation. An efficient carburetor burns fuel more fully, with a fuel consumption rate of 1.18gal/h not only saving fuel but also reducing expenses.

Safe & Reassuring: The reliable CDI ignition system can quickly and safely start the motor, and suspension tilt adjustment pins and anti-vortex plates reduce inclination and vortices, ensuring smooth operation. The water cooling system is designed to maintain the optimal temperature, coupled with overheating protection, allowing you to continuously enjoy the fun of the navigation.

Complete Set: In addition to the outboard motor, our package also includes a flameout rope, a tool kit, etc., which can meet your usage needs at once.

Protective Packaging: This product comes in a custom foam that resists common compression and falls to prevent product damage in transit as much as possible.

Details

Locking Handle: The locking handle below the muffler allows you to easily open the casing to check the internal motor.

Tail Plate Clamping Bolt: It can firmly fix the outboard motor on your ship and is not easy to slide.

Rubber Handle Cover: The rubber-wrapped handle is softer and increases friction, providing a more reliable grip.

Cooling Water Outlet: You can determine whether the water pump is working properly by checking whether it is producing water, to promptly repair the engine if it may malfunction.

Application

It is suitable for rubber boats, inflatable boats, fishing boats, sailboats, yachts, canoes, kayaks, rubber boats, aluminum alloy boats, etc. with a stern height of 17.32 inches or less, assisting aquaculture, water transportation, net fishing, luring, outboard backup, outings, and river cleaning/maintenance.

Specifications

Material: Aluminum Alloy

Color: Black

Surface Treatment: Spray Paint

Assembly Required: No

Number of Items: 1

Engine: 2-stroke 18hp

Displacement: 246cc

Gear Ratio: 2.08(27:13)

Number of Cylinders: 2

Max. Output: 13.2KW

Max. Speed: 4500-5500r/Min

Noise: About 80DB             

Gear Positions: F-N-R

Ignition System: CDI

Cooling System: Water-cooling

Control System: Tiller Control

Starting System: Manual Start

Gasoline: No.92 Lead-free Gasoline

Fuel Type: Mixed Oil (50 Gasoline: 1 2-stroke Engine Oil)

Trim And Tilt System: Manual Tilt

Fuel Tank Capacity: 24L/6.34gal

Fuel Consumption Rate: 4.5L/1.18gal/h

Bore*Stroke: 5.6*5cm/2.2*1.97in

Propeller Diameter: 20cm/8in

Joystick Length: 36cm/14.17in

Handle Length: 14cm/5.51in

Fixed Screw Spacing: 16cm/6.3in

Oil-pumping Pipe Length: 2.9m/9.5ft

Adaptive Transom Plate Height: ≤44cm/17.32in

Gross Weight: 46.05kg/101.5lbs

Net Weight: 28.9kg/63.7lbs

Product Size: 103*47*32cm/40.5*18.5*12.6in

Package Size: 119*71*40cm/46.8*28*15.74in

Package Included

1x Outboard Motor

1x External Fuel Tank

1x Oil-pumping Pipe

1x Flameout Rope

1x Tool Kit

1x English Manual

All Accessories for Assembly

Notes

• Please carefully read the manual and strictly follow the precautions to have a better experience.
• Please measure the height of your boat before purchasing to ensure suitability for this product.
• Please start the motor in the water. If the motor stops circulating water, please stop using it immediately and check the impeller of the water pump to see if the water outlet is blocked.
• Please note that this product should use a mixture of two-stroke engine oil and 92 # unleaded gasoline. The running-in period of the new machine is 10 hours, during which the fuel ratio is 30L (7.93 gal) of gasoline to 1L (0.26 gal) of engine oil. After 10 hours, the ratio is 50 liters (13.21 gallons) of gasoline to 1 liter (0.26 gallons) of oil.
• Please note that the emergency shutdown rope should be inserted when the outboard motor is started, and the other end should be wrapped around your wrist or belt.
• Please do not drive too fast during the running-in period. After the running-in period, the gear oil needs to be replaced, and the second replacement time is about 100 hours or 6 months later.
• Please do not leave this product outside until the cooling water is completely used up. Otherwise, water will enter the cylinder through the exhaust port, leading to engine failure. After cruising in seawater or turbid water, please clean the outboard motor with fresh water and cool the water channel with fresh water. The engine should be stored in a dry and well-ventilated place, and avoid direct exposure to sunlight.
• If not in use for a long time, please thoroughly clean the gasoline in the fuel tank.
• Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.