I have multiple Teltonika RUT950 router/modems (EU / Africa Version) including antennas and power adapter.
All routers are tested and firmware is updated to latest version.


Ethernet
■ IEEE 802.3, IEEE 802.3u standards
■ 3 x LAN 10/100Mbps Ethernet ports
■ 1 x WAN 10/100Mbps Ethernet port
■ Supports auto MDI/MDIX

WiFi
■ IEEE 802.11b/g/n WiFi standards
■ 2x2 MIMO
■ AP and STA modes
■ 64/128-bit WEP, WPA, WPA2, WPA&WPA2 encryption methods
■ 2.401 – 2.495GHz WiFi frequency range
■ 20dBm max WiFi TX power
■ SSID stealth mode and access control based on MAC address

Hardware
■ High performance 560 MHz CPU with 128 Mbytes of DDR2 memory
■ 5.5/2.5mm DC power socket (terminal block connector optional)
■ Reset/restore to default button
■ 2 x SMA for LTE, 2 x RP-SMA for WiFi antenna connectors
■ 4 x Ethernet LEDs, 1 x power LED
■ 1 x bi-color connection status LED, 5 x connection strength LEDs
■ Optional: Din rail or panels with integrated mounting flanges

Software
■ OpenVPN, IPsec, GRE, L2TP, PPTP
■ Backup WAN
■ PPPoE
■ Dynamic DNS
■ SMS and ping reboot, periodic reboot
■ Status, configuration via SMS
■ Send/read SMS via HTTP POST/GET
■ Monitoring by SNMP, SNMP trap, TR-069
■ System log to record the status of the router
■ VRRP
■ QoS and web filter
■ Wireless hotspot with or without RADIUS server
■ SIM card switch controlled by signal, data limit, roaming
■ Configuration profiles
■ Firmware update from bootloader via WebUI
■ Restore point

Electrical, Mechanical & Environmental
■ Dimensions (H x W x D) 80 mm x 106 mm x 46 mm
■ Weight 250 g
■ Power supply 100 – 240 VAC -> 9 VDC wall adapter
■ Input voltage range 9 – 30VDC