CLASSIC BUFFALO BLACK LEATHER BIKER JACKET WITH REMOVABLE CE BACK PROTECTOR

SIZE 10

 THIS JACKET SHOUTS OUT QUALITY.

Here are the measurements:

Top to Tail (back of neck to bottom) - 23.5 inches

Shoulder to shoulder across back - 19 inches

Shoulder to cuff - 24 inches

Armpit to cuff - 16.5 inches

Chest - Armpit to Armpit  (measured flat on outside) - 21 inches

Suggested size - 10

Please read the measurements to check if it will fit you, but we think it will fit a chest size of around 34-36 inches. The maker's label shows the size as a UK 10/European size 36 but please check our measurements to ensure that it will fit you before you buy.

There is light padding built into the shoulders, elbows and back of the waist. The jacket "DOESN'T"come with any removable CE protector. There are provisional pockets on the lining for Back, shoulder and elbow CE protectors (not supplied).

There are 4 zipped pockets at the front - 2 horizontal pockets at the waist with 2 vertical pockets just above them - as well as a leather trimmed inside pocket.

The Buffalo brand name is engraved into the leather on the right of the waist pocket at the front.

There are zips on the wrists and velcro straps on the cuffs.

There is a short zip at the back of the waist with which the jacket could be attached to a pair of biker trousers.

All of the zips are good quality YKK zips and all work well. The main zip can be fastened in either of two positions, so you can use the one that fits you best.

There is a strap with 2 stud fasteners at the neck and an adjustable strap with buckle on each side at the waist. The fastener for one of the studs is missing, please see photos. That fastener is not used if the zip is fastened in the position shown in the photos.

The leather is elasticated behind the sleeves. 

The jacket has a black quilted lining, imprinted with the Buffalo brand name/logo. The lining is a little worn towards the hem but is free from holes, tears, etc.

Very good overall condition.

Made by Buffalo.