This NES has been upgraded with the following:

Tim Worthington's RGB Board v4.0

Current stock firmware (v 1.1)

Palettes are

1. Digital Prime (FBX)

2. Nestopia_YUV

3. Sony CXA

4. Smooth V2 (FBX)

5. FCEUX

6. Wavebeam

Controls are

Start+Select+Left = decrement palette counter

Start+Select+Right = increment palette counter

Start+Select+Left (hold for 2 sec) = disable/enable NESRGB board

Start+Select+Right (hold for 2 sec) = set to palette 1

Start+Select+A+B = reset console

Fully operational de-jitter feature.

Upgraded Audio Circuit via Voultar's Expansion Audio Board Design. This allows additional music found on some Famicom games to be mixed in with the internal audio. The board is equipped with one 47k resistor and one 1k resistor per Voultar's/Firebrandx's specifications. Expansion audio can be accessed by way of an Everdrive cartridge loaded with the corresponding Famicom ROM's or by using an actual Famicom cartridge with a 60 pin to 72 pin adapter that can accommodate expansion audio.

The Region Lockout Chip has been bypassed. This eliminates the common blinking light issue and allows unlicensed games as well as games from other regions to be played.

Motherboard caps and PSU caps have been replaced with new Nichicon capacitors from Digi-Key.

3D Printed SNES Multi-out using Gregg Collins' (of Laser Bear Industries) design. Printed with Black PLA filament.

AV Multiout PCB via Fragol_Roc and Zaxour's Design. The board is made with gold fingers and a slight beveled edge. All parts of PCB are plated with ENIG.

Tested with HD Retrovison SNES Component, SNES S-Video, SNES Composite, SNES C-Sync SCART cables with inline capacitors and SNES Sync on Luma SCART cables. All performed perfectly.

I have left the red stock LED in but I will swap for a color of your choosing at no charge.

Please let me know what color you'd like quickly after payment.

(Colors include: Blue, Green, Yellow, Yellow/Green, Orange, Pink, Purple, White, Warm White, "ROYGBIV".)

*ROYGBIV colors cycle automatically.

The OEM 72 pin connector has been cleaned. No need to press carts down when inserting.

Save wear and tear on the pin connector by simply inserting and powering on.

Motherboard and power supply have been cleaned with IPA.

Shell has been cleaned thoroughly and is in  good cosmetic condition with minimal scuffs.

The console has been tested and performs flawlessly.

Tested with Retrotink 5x.

Compatible with Framemiester.

Compatible with OSSC. (It's been said that the RGB board will not work with OSSC on a few select televisions. Please look into this if you plan to use with the OSSC.

All images are of the actual items for sale.

This listing is for the console only.

NES will be packaged with a double helping of anti-static bubble wrap. And shipped through USPS in a large flat rate box next day.