Package Included:
6 Pcs * WhiteReceiver module (KR2201-4 ) ( include Shell ),
1 Pcs * Remote Control (include battery );
Every parcel only get 1 pcs cross screwdriver as a free gift whatever how many you order.
PT1527,EV1527, SCT527, HS1527, SCL1527, FP1527,EV1527
Do not use this remote control to clone other remote controls, you will lose the built-in 1527 encoding.
Specifications Of The Remote Control:
Operating frequency: 433.92MHz,
Power by 6F22 9V Battery (Battery included),
Material: ABS;
Button: 4 6 8 12 buttons;
Size: 135mm x 42mm x 23mm;
Operating voltage: DC 9V ;
Standby Current: 0mA;
Working Current: >80mA;
Modulation mode: ASK (AM);
Encoding type: Learning;
Transfers distance: 0-3000 M ( Ideal Distance without any block and signal interfere , it would rise and fall about 10%-90% with the block and signal interference.)
Notice:
it is only a common RF remote control(transmitter ).so it is only the professional can buy it alone.or who buy our switch ,then need additional transmitter.
If you a freshman about RF remote control system . please buy the duplicating/cloning /copied remote control . we are So Powerless about the people who do not understand then find it is cheap and buy it . when he get it and tell us it doesn't work with his rolling code or other receiver what what ... and give us the negtive feedback .
Dear Sir and Madam : if you don't know it .please inquiry it .
the receiver and transmitter can work together ,their frequency ,IC chip and Shock resistance must be taken in to consideration.
If you need it to work with your own receiver, you must make sure 100% that your receiver is 433mhz Frequency,does your receiver have a learning button to learn the transmitter code? and does your receiver can be compatible with 1527 ic chip transmitter.
Toggle: Push once the remote button , the relay connects , push twice the remote button , the relay dis-connects .
Latching: Push the remote button A, the relay connects, push the remote button B, the relay dis-connect.
Time delay mode : Push the remote control button , the relay connects , from when release the remote button , after 5s or 10s or 15s or 20s, the relay disconnect automatically.
Automatic energize when power on: when power supply, the relay connects.
Clearing the code :
Push the learning button on the receivers for 9 times , until the LED indicator OFF and then flash,until it flash for 5 times. it mean the code have been cleared successfully;
After clearing the code, all the remote control can not work any more.
Learning the code :(momentary)
Push the learning key on the receiver once time , it comes into momentary setting mode .
Wait for a moment , the LED will be on, it comes into learning state .
Push the remote button , LED indicator on the receiver board will flash 3 times and then come off, learning successfully .
Learning the code : ( Toggle )
Push the learning key on the receiver twice time , it comes into toggle setting mode
Wait for a moment , the LED will be on , it comes into learning state .
Push the remote button,LED indicator on the receiver board will flash 3 times and then come off, learning successfully .
Learning the code :( Latching )
Note: When you choose for latching mode , in order to learn more remote control , you need to learn two different button , the first time learnt is for “ON”, the second time learnt for “OFF”.
For example : button A = ON , button B = OFF
Push the learning key on the receiver triple time , it comes into latching mode .
Wait for a moment , the LED indicator on the receiver board will be on,
Push the remote button A,LED flash for 3 times .
Push the remote button B,
Led indicator flash for 3 times and then come off, learning successfully.
A = ON , B = OFF .
Learning the code :( Time delay mode )
Push the learning key on the receiver forth time , the time dealy for 5 seconds .
Push the learning key on the receiver fifth time , the time delay for 10 seconds.
Push the learning key on the receiver sixth time , the time delay for 15 seconds .
Push the learning key on the receiver seventh time , the time delay for 20 seconds .The LED indicator will be on .Push the remote button , LED indicator flashes 3 times and then off, learning successfully .
Learning the code : (Automatic energize when power on)
Push the learning key on the receiver eight times , it comes into setting mode
Wait for a moment , the LED will be on , it comes into learning state .
Push the remote button,LED indicator on the receiver board will flash 3 times and then come off,
learning successfully .
NOTE: The system can store for 25 pcs of remotes , if the remote get more than 25 pcs , the initial remote control will be lost .