This instrument kit is used to install instruments for vehicles, trucks, motor boats, yachts and other vehicles. 

Good quality, can be replaced directly after purchase.

Product parameters:

Fixed size: 2 big gauge*85mm+ 4 small gauge*55m    

Working voltage: 9-32 VDC

Oil pressure: 10-184ohms, display 0-145 PSI

6 Gauges Set ,Speedo,Tacho,Fuel Level Gauge,Oil Pressure,Volt,Water Temp  

Fuel level: 240-33 ohms, E-F. 

Temperature: 287.4-22.4 ohm, display 100-250F

Voltage: 8-16V

Style: stainless steel plate

Backlight: Red

2 big gauge*85mm+ 4 small gauge*55m

-Operation mode: LCD display, stepping motor

Speedometer:

Application: motorcycle, truck, boat (the driving distance cannot be reset, just like on a car, and the mileage will continue to increase)

Working voltage: 9-32V

Fixed size: 85mm (about 3-3/8 inches)

Operation mode: LCD display with 7-color backlight

Indication range: 0-200KM / H

Signal: GPS

Weight: 327 grams

Tachometer:

Indication range: 0-8000 RPM

Operation mode: LCD display with red backlight

Description: Magnet movement gauge

Weight: 240g

Touch the sensor button to change the setting parameters.

Easy to set pulse/revolution.

Accept all input signals.

Small specifications:

Working voltage: 9-32VDC

Style: stainless steel plate

Background color: black

Backlight: Red

The weight of an item: 130g

Input range:

Oil pressure: 10-184ohms, display 0-145 PSI

Fuel level: 240-33ohms, E-F.

Temperature: 287.4-22.4ohms, display 100-250F

Voltage: 8-16V

Features:

☆ The needle is driven by the principle of moving magnet, which has good durability and vibration resistance.

☆ IP67 waterproof and dust-proof rating

☆ The stepping motor is suitable for the whole series of stepping gauges and has the characteristics of low power

☆ Large consumption, long life, high precision

☆ With curved glass (with anti-fog function)

☆ Using ultra-wide working voltage design (long-term working voltage: 9-32V, maximum reach: 36V (≤1 minute)).

The package includes:

1. 2 big gauge*85mm+ 4 small gauge*55m 

2. 6*Multi-plug socket

 NOTE:

★ Connection tips: the red + orange wire is connected to the positive pole, and the blue wire is used for the negative pole. And the black signal wire is connected to the sensor. (Voltmeter has no black wire)

★ Installation tips: Before installation, first make a hole in the panel (diameter: 52-53mm), and at the same time make sure there is a space (70mm in the backyard of the panel)