Material: ABS Size: approx.45*35*12mm/1.77*1.37*0.47'' Rated voltage: 12V Rated current: 10mA Product weight: Approx. 26g Installation: Wireless Corresponding frequency: 433MHz Modulation: ASK (amplitude modulation) Wireless transmitting distance: 50-100m (open space) Scope: Garage doors, alarm, automatic doors, shutter doors, and so on Cloning chip types: 2260(PT2260,SC2260,LX2260,HX2260); 2262,(PT2262,SC2262,LX2262,HS2262,HX2262),PT2264,PT2240(LX2240),1527( EV1527,HS1527,HX1527 ),FP527,CS5211,SMC918,SMC926,AX5026,AX5326-3,AX5326-4,HT600,HT680,HT6207,HT6010,HT6012,HT6013,HT6014,HT12D, HT46F49E, PIC16F629,PIC16F630 and so on. Different chip manufacturers have different prefixes chip model, as long as the digital portion of the chip can be the same model. Note: We usually do not recommend copying a rolling code chip, because there are many uncertainties when copying a rolling code chip. When copying a rolling code chip remote control, it is not possible to determine whether the original remote control chip is an encryption chip. Therefore, we do not recommend copying the rolling code remote control. Use steps: 1. Clear code: two fingers at the same time hold the unlock key and lock key; the LED light rapidly flashes 3 times in about 2 seconds; let one of the fingers go (the other hand cannot let go), and then use the loose finger to quickly click three times on the loose button until the LED light flashes quickly; the two fingers can release; then press any one key of the remote control; when LED light goes off, it means clear code is successful(four keys all empty); if after you press any button of the remote control, the light is still on, it indicates that the original code has not been cleared successfully. You need to re-clear, and only successfully clearing the code can cloning be successful. You can repeatedly clear and clone the code. 2. Copy: left hand taking the original remote control, right hand taking our cloned remote control and keep two remote control as close as possible; press the first keys of two remote controls at the same time; in about 2 seconds, the LED light will flash quickly 2 times; after one second, the indicator light keeps flashing and let go of your fingers; and then press the key after successful study, the light keeps on, which means that the first key code on original remote control has been copied to the other remote control; the same method can be used in turn on the second key, the third key... If the copy is successful, the remote control function is the same as the original matching remote control. 3. Restore: When you accidentally clear the copy of the remote control code, you can simultaneously press the copy of the remote control of the bottom two keys, LED lights will flash quickly, let go after pressing any key, light long, this Indicating that the code for the remote control is restored. Before using our copy remote control, please be sure to remove the existing code from the remote control. 4. How to deal with the situation where some of the keys can control, the rest cannot control? You can use clear and restore operation, the specific operation is as follows: (1) first clear code; (2) after clearing code, copy the unsuccessful key again, and there is no need to copy the rest buttons; (3) and then clear the code again; (4) restore code; at this time, the original keys that were not successfully copied are now covered by new codes, and the original keys that were successfully copied are now retained. If there is no copy after the second copy of the keys, repeat the above steps again and again until all keys are successfully copied. Precautions: 1. Select the remote control of the prerequisite: the original remote control function is normal, remote control chip is the same or compatible, remote control operating frequency the same. 2. The remote control can only copy the fixed code, learn the code chip and part of the single-chip remote control (can copy the chip model see copyable chip type). 3. Two-way remote control, rolling code remote control, single-chip encryption program remote control cannot be copied. Such as HCS200, HCS201, HCS300, HCS301 and so on. 4. Before copying the remote control, make sure that the existing code on the remote control has been cleared and check that the code is cleared successfully. Otherwise, it cannot be copied. 5. Please ensure that your remote control has enough power, the distance between the two remote control the better! If the copy distance is too close to the switch at different angles to copy. Press and hold the button on the original remote control to send the signal completely normal, and then press the button on the remote control to ensure that the function is completely copied. Note: Please allow 1-3mm differs due to manual measurement. Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.
Specification:
Material: ABS
Size: approx.45*35*12mm/1.77*1.37*0.47''
Rated voltage: 12V
Rated current: 10mA
Product weight: Approx. 26g
Installation: Wireless
Corresponding frequency: 433MHz
Modulation: ASK (amplitude modulation)
Wireless transmitting distance: 50-100m (open space)
Scope: Garage doors, alarm, automatic doors, shutter doors, and so on
Cloning chip types:
2260(PT2260,SC2260,LX2260,HX2260); 2262,(PT2262,SC2262,LX2262,HS2262,HX2262),PT2264,PT2240(LX2240),1527( EV1527,HS1527,HX1527 ),FP527,CS5211,SMC918,SMC926,AX5026,AX5326-3,AX5326-4,HT600,HT680,HT6207,HT6010,HT6012,HT6013,HT6014,HT12D, HT46F49E, PIC16F629,PIC16F630 and so on. Different chip manufacturers have different prefixes chip model, as long as the digital portion of the chip can be the same model.
Note: We usually do not recommend copying a rolling code chip, because there are many uncertainties when copying a rolling code chip. When copying a rolling code chip remote control, it is not possible to determine whether the original remote control chip is an encryption chip. Therefore, we do not recommend copying the rolling code remote control.
Use steps:
1. Clear code: two fingers at the same time hold the unlock key and lock key; the LED light rapidly flashes 3 times in about 2 seconds; let one of the fingers go (the other hand cannot let go), and then use the loose finger to quickly click three times on the loose button until the LED light flashes quickly; the two fingers can release; then press any one key of the remote control; when LED light goes off, it means clear code is successful(four keys all empty); if after you press any button of the remote control, the light is still on, it indicates that the original code has not been cleared successfully. You need to re-clear, and only successfully clearing the code can cloning be successful. You can repeatedly clear and clone the code.
2. Copy: left hand taking the original remote control, right hand taking our cloned remote control and keep two remote control as close as possible; press the first keys of two remote controls at the same time; in about 2 seconds, the LED light will flash quickly 2 times; after one second, the indicator light keeps flashing and let go of your fingers; and then press the key after successful study, the light keeps on, which means that the first key code on original remote control has been copied to the other remote control; the same method can be used in turn on the second key, the third key... If the copy is successful, the remote control function is the same as the original matching remote control.
3. Restore: When you accidentally clear the copy of the remote control code, you can simultaneously press the copy of the remote control of the bottom two keys, LED lights will flash quickly, let go after pressing any key, light long, this Indicating that the code for the remote control is restored. Before using our copy remote control, please be sure to remove the existing code from the remote control.
4. How to deal with the situation where some of the keys can control, the rest cannot control? You can use clear and restore operation, the specific operation is as follows:
(1) first clear code;
(2) after clearing code, copy the unsuccessful key again, and there is no need to copy the rest buttons;
(3) and then clear the code again;
(4) restore code; at this time, the original keys that were not successfully copied are now covered by new codes, and the original keys that were successfully copied are now retained. If there is no copy after the second copy of the keys, repeat the above steps again and again until all keys are successfully copied.
Precautions:
1. Select the remote control of the prerequisite: the original remote control function is normal, remote control chip is the same or compatible, remote control operating frequency the same.
2. The remote control can only copy the fixed code, learn the code chip and part of the single-chip remote control (can copy the chip model see copyable chip type).
3. Two-way remote control, rolling code remote control, single-chip encryption program remote control cannot be copied. Such as HCS200, HCS201, HCS300, HCS301 and so on.
4. Before copying the remote control, make sure that the existing code on the remote control has been cleared and check that the code is cleared successfully. Otherwise, it cannot be copied.
5. Please ensure that your remote control has enough power, the distance between the two remote control the better! If the copy distance is too close to the switch at different angles to copy. Press and hold the button on the original remote control to send the signal completely normal, and then press the button on the remote control to ensure that the function is completely copied.
Note:
Please allow 1-3mm differs due to manual measurement.
Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.
15pcs Specification:
15pcs Material: ABS
15pcs Size: approx.45*35*12mm/1.77*1.37*0.47''
15pcs Rated voltage: 12V
15pcs Rated current: 10mA
15pcs Product weight: Approx. 26g
15pcs Installation: Wireless
15pcs Corresponding frequency: 433MHz
15pcs Modulation: ASK (amplitude modulation)
15pcs Wireless transmitting distance: 50-100m (open space)
15pcs Scope: Garage doors, alarm, automatic doors, shutter doors, and so on
15pcs Cloning chip types:
15pcs 2260(PT2260,SC2260,LX2260,HX2260); 2262,(PT2262,SC2262,LX2262,HS2262,HX2262),PT2264,PT2240(LX2240),1527( EV1527,HS1527,HX1527 ),FP527,CS5211,SMC918,SMC926,AX5026,AX5326-3,AX5326-4,HT600,HT680,HT6207,HT6010,HT6012,HT6013,HT6014,HT12D, HT46F49E, PIC16F629,PIC16F630 and so on. Different chip manufacturers have different prefixes chip model, as long as the digital portion of the chip can be the same model.
15pcs Note: We usually do not recommend copying a rolling code chip, because there are many uncertainties when copying a rolling code chip. When copying a rolling code chip remote control, it is not possible to determine whether the original remote control chip is an encryption chip. Therefore, we do not recommend copying the rolling code remote control.
15pcs Use steps:
15pcs 1. Clear code: two fingers at the same time hold the unlock key and lock key; the LED light rapidly flashes 3 times in about 2 seconds; let one of the fingers go (the other hand cannot let go), and then use the loose finger to quickly click three times on the loose button until the LED light flashes quickly; the two fingers can release; then press any one key of the remote control; when LED light goes off, it means clear code is successful(four keys all empty); if after you press any button of the remote control, the light is still on, it indicates that the original code has not been cleared successfully. You need to re-clear, and only successfully clearing the code can cloning be successful. You can repeatedly clear and clone the code.
15pcs 2. Copy: left hand taking the original remote control, right hand taking our cloned remote control and keep two remote control as close as possible; press the first keys of two remote controls at the same time; in about 2 seconds, the LED light will flash quickly 2 times; after one second, the indicator light keeps flashing and let go of your fingers; and then press the key after successful study, the light keeps on, which means that the first key code on original remote control has been copied to the other remote control; the same method can be used in turn on the second key, the third key... If the copy is successful, the remote control function is the same as the original matching remote control.
15pcs 3. Restore: When you accidentally clear the copy of the remote control code, you can simultaneously press the copy of the remote control of the bottom two keys, LED lights will flash quickly, let go after pressing any key, light long, this Indicating that the code for the remote control is restored. Before using our copy remote control, please be sure to remove the existing code from the remote control.
15pcs 4. How to deal with the situation where some of the keys can control, the rest cannot control? You can use clear and restore operation, the specific operation is as follows:
15pcs (1) first clear code;
15pcs (2) after clearing code, copy the unsuccessful key again, and there is no need to copy the rest buttons;
15pcs (3) and then clear the code again;
15pcs (4) restore code; at this time, the original keys that were not successfully copied are now covered by new codes, and the original keys that were successfully copied are now retained. If there is no copy after the second copy of the keys, repeat the above steps again and again until all keys are successfully copied.
15pcs Precautions:
15pcs 1. Select the remote control of the prerequisite: the original remote control function is normal, remote control chip is the same or compatible, remote control operating frequency the same.
15pcs 2. The remote control can only copy the fixed code, learn the code chip and part of the single-chip remote control (can copy the chip model see copyable chip type).
15pcs 3. Two-way remote control, rolling code remote control, single-chip encryption program remote control cannot be copied. Such as HCS200, HCS201, HCS300, HCS301 and so on.
15pcs 4. Before copying the remote control, make sure that the existing code on the remote control has been cleared and check that the code is cleared successfully. Otherwise, it cannot be copied.
15pcs 5. Please ensure that your remote control has enough power, the distance between the two remote control the better! If the copy distance is too close to the switch at different angles to copy. Press and hold the button on the original remote control to send the signal completely normal, and then press the button on the remote control to ensure that the function is completely copied.
15pcs Note:
15pcs Please allow 1-3mm differs due to manual measurement.
15pcs Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.
- * 12 Monate Garantie. Kaufen Sie mit Vertrauen!
- * Wenn Sie nicht zufrieden sind, wenn Sie Ihren Artikel erhalten, senden Sie ihn bitte innerhalb von 14 Tagen für einen Ersatz oder Geld zurück. Bitte kontaktieren Sie mich, bevor Sie es zurückgeben.
- * Wenn der Artikel innerhalb von 3 Monaten defekt ist, senden wir Ihnen einen Ersatz ohne zusätzliches Ladegerät oder bieten eine Rückerstattung, nachdem wir den defekten Artikel erhalten haben.
- * Wenn der Artikel nach 3 Monaten defekt ist, können Sie ihn immer noch an uns zurückschicken. Wir werden Ihnen einen neuen Artikel schicken, nachdem wir den defekten Artikel erhalten haben. Aber Sie müssen die zusätzliche Versandgebühr bezahlen.
- * 12 Monate Garantie. Kaufen Sie mit Vertrauen!
- * Wenn Sie nicht zufrieden sind, wenn Sie Ihren Artikel erhalten, senden Sie ihn bitte innerhalb von 14 Tagen für einen Ersatz oder Geld zurück. Bitte kontaktieren Sie mich, bevor Sie es zurückgeben.
- * Wenn der Artikel innerhalb von 3 Monaten defekt ist, senden wir Ihnen einen Ersatz ohne zusätzliches Ladegerät oder bieten eine Rückerstattung, nachdem wir den defekten Artikel erhalten haben.
- * Wenn der Artikel nach 3 Monaten defekt ist, können Sie ihn immer noch an uns zurückschicken. Wir werden Ihnen einen neuen Artikel schicken, nachdem wir den defekten Artikel erhalten haben. Aber Sie müssen die zusätzliche Versandgebühr bezahlen.
- * Wir versenden vom Standort des Artikels.
- * Einzelteile werden innerhalb von 3 Werktag (e) nach Zahlung abgeschlossen erhalten versandt werden.
- * HINWEIS: Bitte überprüfen Sie das Paket vor der Unterzeichnung für sie, wenn irgendein Problem mit dem Paket markieren Sie bitte auf die Unterschrift, dass "beschädigt, wenn empfangen", wenn es zu unterzeichnen. Dankeschön.
- * Wir sind nicht verantwortlich für jegliche Zollgebühren oder Einfuhrsteuern.
- * Wir werden POSITIVE FEEDBACK nach Erhalt der Zahlung verlassen. Bitte kontaktieren Sie uns, wenn Sie nicht mit dem Artikel zufrieden sind, nachdem Sie ihn erhalten haben.
- * Alle Nachrichten werden innerhalb von 1 Werktag beantwortet werden. Wenn Sie unsere Antwort nicht erhalten, senden Sie bitte Ihre Nachricht erneut und wir werden Ihnen so schnell wie möglich antworten.
- * Nur seriöse Käufer! Bitte geben Sie nur dann ein Gebot ab, wenn Sie mit allen Bedingungen einverstanden sind.
- * Wenn Sie irgendwelche Probleme oder Bedenken, was auch immer mit Ihrer Bestellung oder Produkte haben, bitte Nachricht an uns und geben uns eine Chance, Ihnen zu helfen, bevor Sie ein Feedback hinterlassen. Wir glauben, dass wir ein positives Ergebnis zu jeder Situation produzieren können und werden hart arbeiten, um Ihr Lob zu verdienen.
- * Wenn Sie mit dieser Transaktion zufrieden waren, geben Sie uns bitte eine 5-Sterne-Bewertung, danke!
- * Unsere Bürozeiten sind Montag bis Samstag von 9:00 bis 18:00 Uhr (GMT +8).
- * An Sonn- und Feiertagen ist unser Büro geschlossen.
- * Wir entschuldigen uns für die verspätete Antwort während der Feiertage.