eBay

NA1000.2 Neuron Series 1000 Watts Max 2-Channel Car Amp with 4-Way Protection Circuitry Multi-Channel Bridgeable Class A/B Amplifier Low & High Level Inputs (Remote Bass Knob Included)

This listing contains: (1) NA1000.2 1000 Watt Max 2-Channel Class A/B Amplifier Bridgable (1) Remote Bass Knob with Connector cable (1) Operations Manual (1) Mounting Hardware Set
2 x 250W @ 4 Ohms 2 x 500W @ 2 Ohms 1 x 1000W @ 4 Ohm
Features: Nickel Plated Terminals Extruded Aluminum Heat Sink Low Level Input High Level Input Low Level Output Remote Bass Knob Included Mil Spec Double-Sided Glass Epoxy Circuit Board 4-Way Protection Circuitry: Thermal, Short Circuit, Overload and DC Offset Variable Low-Pass Crossover: 50Hz - 250Hz High-Pass Crossover: 60Hz - 1.2kHz Variable Input Sensitivity: 200mV - 6V 45Hz Bass Boost: 0 - 12dB ATC Fuse: 30 Amp x 1
Product Dimensions: 7.01" x 2.09" x 8.66" (178 x 53 x 220mm)

Product Description

The NEURON Series of Amplifiers from Alphasonik will leave you astonished when you experience the power deliverance of these amplifiers and leave you in a conundrum on how it's even possible to achieve the power vs the almighty dollar. Not only did we accomplish the power that is needed and desired, but we didn't leave out any of the bells & whistles either. Things like 4-way protection circuitry and RCA throughputs to add more amplifiers. Check out the details below!

High Level Inputs

High Level Inputs are an added bonus of having the capability of using the source units speaker outputs. Having High Level Inputs is needed if your source unit doesn’t have Low Level Outputs. Tap into the rear decks speakers and you’re all set! Eliminating the need for a Hi to Low Converter.

Low Level Passthrough

The NA1000.2 is equipped with RCA PASSTHROUGH. This feature is extremely helpful for multiple reasons. If you desire to add a second amplifier later on the future and don’t have enough RCA Outputs from your source unit. You can use the RCA PASSTHROUGH to get the signals needed to add on.

Nickel Plated Terminal Block

Nickel plated terminal blocks have been used on the NEURON series amplifiers. Since most cable is stranded, it is necessary to use terminal blocks to hold the strands together in fastening the connections. This type of terminal block maximizes the connection to deliver the voltage and current draw needed.

Remote Bass Knob

External bass controller that will allow you to adjust the bass level remotely without having to retune the amplifier. This is a perfect solution to increase and decrease the bass when you have a wide variety of music genres. Giving you the ability to adjust the bass song by song.

Specifications

4 Ohms	250 Watts x 2
2 Ohms	500 Watts x 2
4 Ohms Bridged	1000 Watts x 1
Terminals	Nickel Plated
Input Signals	Low Level & High Level Inputs
Output Signals	Yes
Remote Bass Knob	Yes
Amplifier Protection	Thermal, Short Circuit, Overload and DC Offset

Low Pass Crossover	50 Hz - 250Hz
High Pass Crossover	60 Hz - 1.2kHz
Variable Input Sensitivity	200mV - 6V
Frequency Response	10Hz - 30kHz
Bass Boost	0 - 12dB
S/N Ratio	>90dB (+/-3dB)
Fuse Rating	ATC 30A x 1
Dimensions	7.01" x 2.09" x 8.66" (178 x 53 x 220mm)

Add to Cart	Add to Cart	Add to Cart	Add to Cart	Add to Cart
Customer Reviews	3.9 out of 5 stars 17	3.9 out of 5 stars 17	3.9 out of 5 stars 17	3.9 out of 5 stars 17	3.9 out of 5 stars 17
Price	$109.95$109.95	$129.95$129.95	$189.95$189.95	$139.95$139.95	$179.95$179.95
Amplifier Class	Class A/B	Class A/B	Class A/B	Class A/B	Class A/B
Channels	2	2	2	4	4
Power Output	1000	1600	3000	1600	2000
RCA Pass Through	Yes	Yes	Yes	Yes	Yes
Bass EQ	Yes	Yes	Yes	Yes	Yes
Low Pass Filter	Variable	Variable	Variable	Variable	Variable
Inputs	Low Level / High Level	Low Level / High Level	Low Level / High Level	Low Level / High Level	Low Level / High Level
Bass Knob Included	Yes	Yes	Yes	N/A	N/A
Dimensions	7.01" x 2.09" x 8.66" (178 x 53 x 220mm)	7.01" x 2.09" x 10.24" (178 x 53 x 260mm)	7.01" x 2.09" x 13.39" (178 x 53 x 340mm)	7.01" x 2.09" x 11.81" (178 x 53 x 300mm)	7.01" x 2.09" x 12.6" (178 x 53 x 320mm)

Add to Cart	Add to Cart	Add to Cart	Add to Cart	Add to Cart
Customer Reviews	3.9 out of 5 stars 17	3.9 out of 5 stars 17	3.9 out of 5 stars 17	3.9 out of 5 stars 17	3.9 out of 5 stars 17
Price	$129.95$129.95	$179.95$179.95	$179.95$179.95	$249.95$249.95	$299.95$299.95
Amplifier Class	Class AB	Class AB	Class-D	Class-D	Class-D
Channels	1	1	1	1	1
Power Output	1600	2400	2000	4000	6000
RCA Pass Through	No	No	No	No	No
Bass EQ	Yes	Yes	Yes	Yes	Yes
Low Pass Filter	Variable	Variable	Variable	Variable	Variable
Bass Knob Included	Yes	Yes	Yes	Yes	Yes
Dimensions	7.01" x 2.09" x 9.45" (178 x 53 x 240mm)	7.01" x 2.09" x 11.81" (178 x 53 x 300mm)	7.01" x 2.09" x 6.30" (178 x 53 x 160mm)	7.01" x 2.09" x 8.66" (178 x 53 x 220mm)	7.01" x 2.09" x 10.24" (178 x 53 x 260mm)

Item model number	APH-NA1000.2
Item dimensions L x W x H	7.01 x 8.66 x 2.09 inches
Mounting Type	Surface Mount
Product Dimensions	7.01 x 8.66 x 2.09 inches; 5.38 Pounds
Country of Origin	China
Style	1000 Watts 2-Channel
Number of Channels	2

Shipping

Fast shipping is very important for us.

Our standard US shipping service is FREE.

Your order will be shipped within 2-3 business days upon full payment received.

Your order will be delivered within 2-3 business days after the handling time.

We only ship to the confirmed PayPal address. We reserve the right to cancel any order for any reason at any time.

We are not responsible for undeliverable addresses.

Returns and payment

We offer a 30 days return policy from checkout winning date.

We allow only PayPal as payment method

FeedBack

Your feedback very important to us, after you get your package and you are satisfied with our service please leave us positive feedback

If you have any problem with your order / any questions please before leave any type of feedback

For any questions, using eBay contact system