Welcome to our Ebay store
We specialize in
RC Power Products
such as
ESC's, motors,
and wiring accessories.
Along with
QS8 Connectors & Accessories!
We sell the best selection of
esc mount plates available!
Check out our mounts
that fit
Traxxas X Maxx, XRT,
& Maxx Trucks!
Fit Arrma Kraton/Outcast
6s & 8s Trucks!
And try our
8 volt 28 cfm
4028
Super High Speed Fans
NO MORE NEED
for 3s or 4s
extra batteries in
your car to run
the cooling fans!!
Just plug into
the receiver for
high speed fans!
WE COMBINE SHIPPING!
1 Reduced shipping charge
when checking out with
multiple items!
We are Authorized Dealers for
Castle Creations
&
Hobbywing
Listed item Specifics:
BRAND NEW!
Cobra 8 ESC
up to 6s esc
We offer the esc
ready to run
With our QS8 system
Options A-H
that has (1) Male QS8
attached to the esc
and then you can choose
a series harness or plug
to match your connectors
Options A-H
The esc has 1 QS8 Male
ATTACHED
Then you receive
the harness/plug
you choose for your
battery end type
or
You can have the connectors
we offer attached directly
to the esc with a:
single male connector
or
(2) male connectors
attached directly to the esc
in series using a 10 awg
4" long jumper wire
Doubles Battery Voltage
ESC connectors are
guaranteed for life
Not to come apart
We offer the esc
without connectors
and
We offer the 3 motors alone
No esc
Cobra 8 esc
We're thrilled to introduce the Cobra 8, our next generation electronic speed controller (ESC) for surface applications. As the inaugural product in a new line, the Cobra 8 is engineered with cutting-edge technology tailored specifically for 1:8th scale vehicles weighing up to 15 lbs.
Note: The Cobra 8 ESC is not intended for drag racing applications.
The Cobra 8 boasts a state-of-the-art 32-bit, dual-core processor, ushering in a new era of precision and performance. Its enhanced data logging capabilities offer extended recording times, faster sampling rates, and a wealth of data points, enabling users to delve deeper into their vehicle's performance than ever before.
Crafted with a CNC aluminum bottom case, the Cobra 8 is engineered to endure the most rigorous conditions, ensuring reliability in every race or off-road adventure.
One of its defining features is our acclaimed CRYO DRIVE technology, engineered to reduce operational temperatures, significantly prolonging the ESC's lifespan. Moreover, equipped with an impressive 8-amp BEC, the Cobra 8 can effortlessly power the most demanding servos, making it an indispensable ally in your high-performance setup.
We’ve packaged the Cobra 8 with three different Castle 4 -POLE 12-SLOT motor options to overpower a wide range of 1:8th scale vehicles.
NEW FEATURES:
- 32-Bit Processing power for smoother motor control and improved response time.
- Enhanced Data Logging includes:
- Double the maximum sample frequency of older generations.
- 8x increased logging time of older generations.
- Data point for ESC electrical motor timing.
- Data point for acceleration via onboard accelerometer.
- Looping feature prevents interruptions in data log recording.
- Ability to download specific sessions.
- Additional tuning features include:
- Improved braking adjustability
- Separate brake and reverse curves
- Highly adjustable internal BEC. (5.0V - 8.0V adjustable in 0.1V increments)
- Access to tuning options and firmware updates for free with Castle Link V4 USB programmer included with purchase. Now with USB-C connector! (Requires Windows 10 or higher)
- Mounting holes located in bottom of aluminum case for installation into vehicle.
MORE FEATURES:
- Input Voltage Range 6.0v - 25.2v (2s - 6s LiPo)
- SmartSense™, Sensored Only and Brushed Motor Operation Modes
- Powerful Integrated 8A Peak Adjustable BEC (5.0V - 8.0V)
- CRYO-DRIVE™ Technology minimizes the amount of time the ESC’s electrical components spend generating heat, resulting in improved thermal performance during partial throttle operation where the majority of driving occurs
- ESC is housed in a rugged CNC aluminum case and potted in waterproof epoxy to protect the electronics and promote efficient heat transfer
- Premium forged heatsink with elliptical fins for superior air flow and increased heat dissipation
- Oversized factory equipped thermally controlled 30mm cooling fan
| - Waterproof design for all weather conditions
- Data logging capability to capture and record performance data from your vehicle
- Aux Wire Function or "on-the-fly" adjustments using your transmitter
- Audible alerts for easy diagnosis of common issues such as motor-over-temperature and low-voltage cutoff
- Convenient transmitter programming for six common adjustable settings including cutoff voltage and drag brake
- Includes Castle Link V4 USB adapter for Windows.
- Cobra 8 is proudly designed and manufactured in Olathe, KS USA and backed by Castle Creations' 1-year warranty
|
COBRA 8 COMES WITH:
- Cobra 8 ESC
- Castle Link V4 USB Adapter
- 300mm Direct Connect Sensor Wire
- Cobra Decals
- ESC Quick Start Guide
|
| Technical Specs |
|---|
| Input Voltage Range: | MIN: 2s LiPo, MAX: 6s LiPo (25.2 V)
|
| BEC Specifications: | 5.0V - 8.0V adjustable in 0.1V increments; (8A Peak); default 5.5V |
| Operating Environment: | Waterproof* design allows for use in nearly any environment. |
| Running Modes: | SmartSense Brushless, Sensored Only, Brushed |
| Brake: | Proportional |
| Reversible: | Yes, but may be disabled for racing. |
| On/Off Switch: | Yes, waterproof
|
| Cooling Fan: | Yes, factory equipped (30MM),temperature controlled |
| Size: | 60mm x 52mm x 43mm (2.36" x 2.04" x 1.69")
|
| Weight (with no battery connector): | 5.84 oz. (165.6 grams)
|
| Connectors: | 6.5mm female bullets for motor connection, matching 6.5mm male bullets required
|
| Items Needed for Operation: | Batteries
|
| Product Use Statements: | Not intended for drag racing applications |
| Application Guidelines: | Intended for 1/8th scale vehicles weighing up to 15lbs and up to 6s LiPo.
|
Programmability:
| Fully programmable Castle feature set using the included FREE Castle Link V4 USB adapter and freely downloadable NEW Castle Link Windows™ software. (Windows 10+ required) |
With the Cobra 8 esc
& 2200kv motor you can
run up to 6s
2200kv 6s Motor
| Motor Specs |
|---|
| Input Voltage Range: | 2S-6S LiPo
|
| Kv: | 2200 |
| Max. RPM: | 60,000
|
| Size: | Length: 75.4mm
Diameter: 40mm (41.4mm with fins)
|
| Weight (w/wires): | 426g (15.1oz) ; 380g without wires
|
| Shaft Size: | Length: 20mm
Diameter: 5mm |
| Mounting Hole Specifications: | M3 and M4 @ 25mm
|
| Cooling Fan: | Use our RCP Xtreme Cool 40-42mm motor bracket with 2 fans. |
| Connectors: | 6.5mm male connectors on 10-gauge wire
|
Application Guidelines:
| Ideal for 1:8 scale buggies, truggies, on-road vehicles and 1:10 scale monster trucks up to 15lbs.
Not recommended for use in high speed 1/8th and larger applications (IE Arrma Infraction and Limitless, Traxxas XO-1)
|
| Tech Notes: | Running modes: SMARTSENSE™, Sensored, Sensorless with Castle sensored capable ESCs.
Water Resistant Design: The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. Castle recommended applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. |
With the Cobra 8 esc
& 2650kv motor you can
run up to 4s
2650kv 4s Motor
| Motor Specs |
|---|
| Input Voltage Range: | 3S-4S LiPo
|
| Kv: | 2650Kv
|
| Max. RPM: | 60,000
|
| Size: | Length: 67.7mm
Diameter: 40mm (41.4mm with fins)
|
| Weight (w/wires): | 383g (13.6oz) with wires. 334g without wires.
|
| Shaft Size: | Length: 20mm
Diameter: 5mm |
| Mounting Hole Specifications: | M3 and M4 @ 25mm
|
| Cooling Fan: | Use our RCP Xtreme Cool 40-42mm motor bracket with 2 fans.
|
| Connectors: | 6.5mm male connectors on 10-gauge wire
|
Application Guidelines:
| Ideal for 1:8 scale off-road and on-road vehicles as well as 1:10 scale 4WD SCT up to 9lbs and up to 4s LiPo.
|
| Tech Notes: | Running modes: SMARTSENSE™, Sensored, Sensorless with Castle sensored capable ESCs.
Water Resistant Design: The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. Castle recommended applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. |
With the Cobra 8 esc
& 1800kv motor you can
run up to 4s
1800kv 4s Motor
| Motor Specs |
|---|
| Input Voltage Range: | 3S-4S LiPo
|
| Kv: | 1800
|
| Max. RPM: | 60,000
|
| Size: | Length: 67.7mm
Diameter: 40mm (41.4mm with fins)
|
| Weight (w/wires): | 385g (13.6oz) ; 336g without wires
|
| Shaft Size: | Length: 20mm
Diameter: 5mm |
| Mounting Hole Specifications: | M3 and M4 @ 25mm
|
| Cooling Fan: | Use our RCP Xtreme Cool 40-42mm motor bracket with 2 fans.
|
| Connectors: | 6.5mm male connectors on 10-gauge wire
|
Application Guidelines:
| Ideal for 1:8 scale off-road and on-road vehicles as well as 1:10 scale 4WD SCT up to 9lbs and up to 4s LiPo.
|
| Tech Notes: | Running modes: SMARTSENSE™, Sensored, Sensorless with Castle sensored capable ESCs.
Water Resistant Design: The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. Castle recommended applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. |
We Combine on Shipping
Hit "Save This Seller"
We are adding cool new items
in our store for RC!
Thank You for your business!