IMPORTANT: The bypass module requires a Fortin Flashlink Updater in order to program it to work in your vehicle AND IS SOLD SEPARATELY! PLEASE CHECK OUR EBAY STORE FOR OUR FORTIN BUNDLES THAT INCLUDE THE FLASHLINK!

EVO-ALL Features:

• 3x on-board LEDs for simplified programming and diagnostics.
• 1x preloaded firmware for maximum compatibility.
• 4-wire Fortin 2-way datalink port for data-to-data (RS-232) communication with datalink equipped remote-starters and security-systems.
• 20-wire general purpose plug for wire-to-wire connections with non-datalink equipped remote-starters and security-systems
• Self-Learning algorithm automatically detects the vehicle during programming and adjusts accordingly 

Communication Ports

• 3x CAN-Bus controllers.
• 3x General purpose controllers (J1850, Class 2, encrypted key etc.).
• 2x On-board Relays (SPDT).
• 1x Analog Controller 0-12VDC @ 20mV steps (Passlock, MUX).
• 1x TB control port for TB-series modules

THAR-GM1 Features:

• EVO-ALL T-Harness for GM vehicles
• T-Harness connectivity with the EVO-ALL on 2010+ "flip-key" GM vehicles
• A T-Harness can now be used with the EVO-ALL to perform a full remote-starter and security installation

• The T-Harness plugs directly in to the ignition harness on:

  • Chevrolet Camaro 2010+
  • Chevrolet Cruze 2011+
  • Chevrolet Equinox 2010+
  • GMC Terrain 2010+
  • Buick LaCrosse 2010+
  • Buick Regal 2011+
  • Chevrolet Malibu 2013 +
  • Also compatible with new Chevrolet Sonic 2012 and Chevrolet Orlando 2012

** These units required to be flashed/updated with a flashlink cable in order to set them up to use with your OEM key fob remote. Out of the box this unit will not funtion with your OEM remotes.
**  T-Harness may not complete installation and some wires may need to be hard wired into vehicle similar to a typical car starter install.
**  Check manufactorers web site to make sure your vehicle is comatible with this system