The camera is in good condition for its age with no damage apparent. The shutter fires and the film advance works
The battery cover is missing so therefore untested and sold as parts/not working. Battery compartment appears to be reasonably clean
There are some dirty specks visible in the viewfinder, the lens appears to be clean
The Topcon IC-1 Auto is a 1973-1978 35mm SLR from Tokyo Kogaku named for the Integrated Circuit which controlled its shutter priority auto exposure. It was the successor to the Topcon Unirex, and the last Topcon camera to use the UV bayonet lens mount. The IC-1 is remarkably similar to the Unirex in looks: rumour has it that Seikosha ceased to make the leaf shutter used in the Unirex, resulting in that camera being modified to accommodate a focal-plane shutter, and becoming the IC-1.
Lens mount: Topcon UV bayonet. The mount included a locking facility when Topcor UV lenses are attached.
Viewfinder: Fixed eye-level Pentaprism finder, with 0.8x image (standard lens) and 93% of the width and length of the actual picture area. Micro-prism focusing spot surrounded by fine focus ring and full area ground-glass, with Fresnel lens plate. Aperture scale is visible on left edge of finder area, with warning areas at both ends of the scale.
Shutter: Electronically-controlled cloth focal plane shutter, with shutter speed ring on lens mount. Ten shutter speed settings (green: manual only) 1, 1/2, 1/4, (black: auto) 1/8, 1/15, 1/30, (flash sync: red) 1/60, 1/125, 1/250 and 1/500 second, plus Bulb. Internally coupled to the built-in exposure setting system.
Meter: TTL centre weighted full aperture measuring system, with two CdS cells on both sides of the finder eyepiece measuring the reflected light of the full finder area.
Exposure: Automatic shutter speed priority (1/8th to 1/500th), or fully manual.
Film Speed: 25 to 3200 ASA (plus DIN scale).
Flash: Electronic flash units sync at 1/60th.
Film Advance: Single stroke lever (120°).
Frame Counter: Automatic count-up and reset.
Rewind: Via crank and bottom release button.
Size: 141 x 93 x 59mm (W x H x D).
Battery: 2 x 1.35v PX625A mercury battery (use the equivalent WeinCELL MRB625 zinc air cell). NOT INCLUDED
Please see phptographs for condition detail and contents as these form part of the listing description