SMA Female ADF4351 PLL RF Signal Synthesizer 35MHz 4 4GHz Frequency Source
DESCRIPTION


Features:
* Brand new and high quality
* Made of high quality materials,
* The ADF4351 source cod e development board has a carefully designed circuit board layout.
* Can be controlled by the official software of the host computer.
* All control pins are le ad out for easy .
* Default value +-50ppm 25M active crystal oscillator.
* A three-wire serial peripheral interface bus le ads to the control pins and status lock pins, allowing all futions iluding point scanning and frequey hopping.

Specification:
Output frequey range: 35MHz-4.4GHz (ADF4351)
Power supply voltage: 4-9V (5VDC)
output signal:
2.2GHZ--4.4GHz sine wave (basic)
35MHZ--2.2GHz square wave (basic part)
Output signal: output speed, signal strength: +5dBm (programmable)
RF Connector: SMA Female
Control interface: three-wire serial peripheral interface bus
Referee clock: 10.000MHZ (default), via external SMA interface
Dimensions: 4.8 x 4.9 cm/1.89 x 1.93 ihes (approx.)

connect:
This module can be connected to the LCD1602/LCD12864 module through pin headers (can be directly reversed), which facilitates software debugging and has a lock indicator light (Lock). The pins correspond to the following:
1. Grounding----------------------Grounding
2.Power supply voltage (5V)-------------------- VCC
3.VO ----------------------------- (empty)
4. -------------------------- (empty)
5.R/W ---------------------------- Multiplexer output
6.EN ----------------------------------------- Clock
7.DB0-------------------------data
8.DB1-------------------------LE
9.DB2-------------------------CE (with 10K pull-up)
10.DB3-------------------------GND (do not connect)

Referee clock:
The default referee clock signal of 10.000MHZ is the active clock or external referee clock signal. You need to use a soldering iron to modify the three-way connection and connect the EXT_REF external referee signal.
RF output
For ease of use, the default is wideband output, which outputs two differential signals, o ne can be used for output and the other can be used for monitoring output.

Package Iluded:
1 x ADF4351 RF signal source frequey synthesizer

Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

POLICES

 

We only ship to confirmed ebay Order addresses. Please comfirm that your Order address is in line with your shipping address.

 

Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size. 

 

It takes about 7-15 working days to Australia; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance.

 


Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.

 

We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via "Ask seller a question" . We will reply your email within 24 working hours.