2S 7.4V 6A/10A Li-ion Battery Charge Protection Board PCM PCB 15A/30A Peak For Power Bank Cell Charging
Specification:
Types of: 2S 7.4V
Wiring mode: Common Port
Working power consumption: 10uA
Main circuit conduction internal resistance: ā¤15mĪ© / ā¤10mĪ©
Discharge:
Single battery over-discharge voltage: 2.35VĀ±0.025V
Continuous working current: 6A/10A
Instant protection current: 15A/30A
Overcurrent recovery conditions: charge recovery/disconnect load
Short-circuit recovery conditions: charge recovery/disconnect load
Recharge:
Single battery overcharge voltage: 4.28VĀ±0.025V
Continuous charging current: 6A/10A
Charger voltage: 8.4V (recommended)
Package:
1 x Protection Board
or
2 x Protection Board
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.
Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.
We only ship to confirmed ebay Order addresses. Please comfirm that your Order address is in line with your shipping address.
Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size.
It takes about 7-15 working days to US; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance.
We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via "Ask seller a question" . We will reply your email within 24 working hours.