100% brand new and high quality

NOTE: composite don't included!

Product Description

AR heater is designed for heating inlays and dental veneers to improve the flowability during bonding,preventing premature curing of the composite material and heating the resin, injection nozzle, anestheticetc.AR heater adopts the precision circuit to control its heating module,

and keep the temperature within ±1°C .Depending on the material and personal choice, the temperature canset to: 40°C, 45°C and 50°C .

Composition

1- Filter cover

2-Heating plate

3- Honeycomb heating barrel

4-Heating base

5-Indicator light

6-On/OFF

7-TEMP button

8-DC

9-Power adapter

Operation

1. Place the heating base on a flat tabletop

2. Plug in the power adapter, then press the button“On/Off”to start heating. (Default 40°C after power on). 
3.After power on, single click“On/Off”to select the required heating temperature (40°C, 45°C, 50°C). The corresponding temperature indicator flashes during heating. When the indicator turns from flashing to ever bright, it means that it already reaches the required temperature. After that, it goes into insulation. Pleaserefer to Form 1 for details:

FORM 1

TenperatureI                   Indicator light color                 Heating                               Reach preset temperature

40°C                                         White                       White LED flashing                      White LED is always on 

45°C                                         Green                      Green LED flashing                   Green LED is always on 

50°C                                         Blue                          Blue LED flashing                     Blue LED is always on 

NOTE

1.Heating base and heating plate cannot be used as non-stick hybrid mats.

2. Avoid scratching the heating base and the bottom of heating plate while using.

3.To avoid cross contamination, do not use again the used heating base and heating plate before disinfection.

4.The heating base and heating plate must be thoroughly cleaned if the composite materialis stuck on it.

5.Do not use the power adapter that exceeds the applicable voltage

Cleaning and disinfection

AlI parts can be wiped clean with a cloth that dampens with disinfectant. Do not immerse any parts in anyliquid for cleaning and disinfection. It can not be autoclave sterilization.

Troubleshooting tips

3 indicators flash together    Temperature control sensor failure

Technical parameters

Power adapter

Input: 100-240V AC 50/60Hz

Output: DC 12V 2A

Power: 24W

Temperature setting: 40±1°C , 45±1°C  and50±1°C 

Filter range: (light <500nm) can't pass through the filter cover

Warranty

1. One year warranty on all parts of this equipment. Man-made damage is not covered bv the warrantv period.
2.Do not disassemble the equipment to prevent electric shock after the failure occurs. Please return to dealers or manufacturer.
3. Do not dissemble the equipment for repair. Oherwise,it is not free during the arranty period.

Production Display：
 

  *The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item

 *Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item. Please understand, Thank you!

International Buyers – Please Note：

1. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility.
2. Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.