DC Voltmeter Ammeter Power Energy Digital Voltage Current Cap Ohm Hour SOC Meter LCD DC 60-200V 10A/50A/100A/200A/300A Shunt
This document describes the specification of multi-function battery tester PZEM - 013/015 DC, This meter is mainly used to test battery voltage, discharge current, discharge power, discharge impedance, capacity, idle energy, energy consumption and running time and display the measurement data via LCD screen .
PZEM - 013: Measuring range 10A (built-in shunt)
PZEM - 015: Measuring range 300A (must be used with external shunt, no matter what current test, can be matched with 50A, 100A, 200A, 300A four kinds of shunt).
Functional description
Tension
Range 0~200v (when test below 8V, please use independent power supply mode)
The starting test voltage: 0.05V
Accuracy: 1%
Display format
< 10V display as 9.99V
< 100V display as 99.9V
> 100V displayed as 199V
Current
Range: 0~10A (Type: PZEM - 013)
0-300A (Type: PZEM - 015) can set 50A 100A 200A 300A, 4 ranges depend on external shunt, 100A in default
The starting test voltage: 10mA (Type: PZEM - 013)
20mA (Type: PZEM - 015)
Accuracy: 1%
Display format
< 1A display like 999mA
< 10A Display like 9.99A
< 100A display as 99.9A
> 100A display as 199A
power
Range: 0 ~ 2000W (Type: PZEM - 013)
0-60000W (Type: PZEM - 015)
The starting test voltage: 0.1W (Type: PZEM - 013)
0.2W (Type: PZEM - 015)
Accuracy: 1%
Display format
< 10W display with 9.99W
< 100W display as 99.9W
< 1000W display like 999W
< 10000W display as 9.99kW
> 10000W display as 19.9kW
Inpedance = voltage/current
Range 0~100Ω
Accuracy: 1%
Display format
< 100Ω Display as 99.9Ω
> 100Ω Display like 199Ω
capacity
Range 0~1000AH
Accuracy: 1%
Display format
< 1AH display as 999mAH
< 10AH Display like 9.99AH
< 100AH display as 99.9AH
< 1000AH display as 999AH
SOC
SOC is displayed via the battery symbol, total 10 grids, each network 10% energy available
SOC is calculated from the current battery voltage value, before testing you should preset the full voltage and cut-off voltage depending on the battery type.
Each grid voltage = (the highest voltage-the lowest voltage)/10
energy
Range 0~19999kWh
Accuracy: 1%
Display format
< 1kWh Display as 999kWh
< 10kWh Display as 9.99kWh
< 100kWh Displayed as 99.99kWh
< 1000kWh displayed as 999.99AH
> 1000kWh displayed as 9999AH
Over the test area becomes zero
Duration
Range 0~10999 hour (no load time does not accumulate)
Display format: 0:00:00 ~ 999:59
Over the test area becomes zero