Description
- Top-mounted electric agitator, DC permanent magnet motor, low noise, maintenance-free. Smooth start, overload protection, loop protection, adjustable speed, precise and controllable.
![](https://i.ebayimg.com/00/s/MTAwMFgxMDAw/z/1MAAAOSwc1BeqozX/$_10.JPG?set_id=880000500F)
Package Includes:
- 1 × Host
- 1 × Stirring Rod
- 1 × Pillar
- 1 × Thick Base
-
Features & Highlights
1. Competent for high load
Can work continuously for a long time, outstanding performance.
2. The condensation clamp is wrapped in rubber
The condensation clamp is wrapped with rubber, which increases the friction and effectively clamps the vessel. The torque can be adjusted automatically according to the change of sample viscosity.
3. High and low speed, accurate and controllable
The LCD displays the set value and actual value of the speed, and can monitor the speed and time in real time. The speed range is wide 100-2000rpm, constant speed, high and low speed can be accurately controlled.
Range of use:
- It is a good tool for petroleum, chemical industry, metallurgy, textile, food, medicine and health, environmental protection, biochemical laboratory, analysis room, education and research.
Weights & Dimensions
- Weights: 8.9 KG
- Dimensions: 46 * 36 * 17 CM
![](https://image.pushauction.com/0/0/548d9de0-d28e-4a5a-9f1b-de1fd6e274a4/8babf15d-905c-46f5-a361-d799cab43555.jpg)
Specifications
- Large mixing capacity (H, O): 40L
- Motor input power: 120W
- Motor output power: 100W
- Mixing machine power: 130W
- Voltage: 100-240V
- Speed: 100-2000rpm
- Speed display: LCD
- Variable speed: 20rpm
- Torque: 60 (N / CM)
- Overload protection: automatic stop
- Maximum viscosity [MPAS]: 50000
- Drilling chuck clamping diameter range [VAC]: 0.5-10
- DIN EN60589 protection method: IP42
- Allowed ambient temperature [° C]: 5-40
- Allowed ambient humidity [%]: 80
Steps:
- Press and hold the right button to boot, press the set button to select the setting
- Press the set button once, the mode flashes, press the upper and lower two buttons in the middle to select the mode, a total of three modes corresponding to different speed and time.
- Select the mode mode, press the set button again, Rpm flashes and use the up and down keys to set the required speed per minute.
- After setting the speed, press the set key, Min flashes, use the up and down keys to set the required timing time, after starting, the speed reaches the set speed, and the timing starts timing.
- Set the above parameters in a certain mode, long press the set key, the screen flashes, indicating that it has been stored in this mode, the next time you only need to select mode to correspond to the set speed and time, press the right button Start and pause, long press the key
- Shut down.
Statement (FDA, ARTG)
The sale of this item may be subject to regulation by the U.S. Food
and Drug Administration and
state and local regulatory agencies. If the item is subject to
FDA regulation,
I will verify your status as an authorized purchaser of this item
before shipping of the item.
If you have questions about legal obligations regarding sales of
medical devices,
you should consult with the FDA's Center for Devices and
Radiological Health:
https://www.fda.gov/cdrh/devadvice/
https://www.fda.gov/cdrh/industry/support/index.html
Thank you for your cooperation.