• This test strip is calibrated at 0, 25, 50, 100, 150, 200, 250, 300, and 350+ ppm molybdate, and pH 5-10 with increments of .5
• Packed in moisture wicking bottle, protecting the strips from the elements
• Instructions and color chart printed directly on the bottle so you never lose them
• Can be used to test Molybdate and pH, both critical in the water treatment industry and for closed loop systems

The Molybdate test strip detects molybdate levels from 0-350ppm in increments of 0-25-50-100-150-200-250-300-350ppm. This strip also tests the pH of liquids from 5-10 in increments of 0.5. Molybdate is commonly used as a corrosion inhibitor in the water treatment industry. Molybdate is effective in chilled or hot water systems over a wide pH range and is not normally affected by the use of biocides, such as chlorine. When used alone, molybdate levels of 300 ppm or more are needed to effectively inhibit corrosion.

Instructions:

Dip the Molybdate test strip into the solution for 1 second and remove.

Shake off excess liquid.

Compare Molybdate test pad to color chart within 10 seconds.

Compare pH test pad to color chart at 30 seconds. Do not let the strip dry out.