Add Some Style to Your Game!
These digitally printed wraps are the perfect way to personalize your Cornhole Boards. They are printed on air release vinyl to allow for an easy application with no bubbles.
Choose Laminated or Non-Laminated Wraps
* Center hole is NOT pre-cut and should be cut after installation to allow for a perfect fit.
** This listing does not include the actual wooden boards, just the 2 vinyl wraps.
Wraps will NOT stick to plain wood, you must prepare the wood with primer or paint.
Recommended primers/paint: KILZ® Premium, ZINSSER® Bulls Eye 1-2-3® Water-Base Primer, Glidden Professional GRIPPER® Interior/Exterior Primer Sealer, Ronan Prime-All, BEHR PREMIUM PLUS® Interior/Exterior Multi-Surface Primer & Sealer
NOT recommended: KILZ COMPLETE®, ZINSSER® Cover-Stain® Oil-Base Primer, BEHR PREMIUM PLUS® Exterior Flat No. 4050
Note: Edges are to be finished with an additional pass of a heat gun/blow dryer and final squeegee stroke as the film cools and adhesive bond builds. Merely passing a heat gun across cut edges does no good as the additional heat actually releases the adhesive and accelerates edge shrinkage. The final stroke with a squeegee as the film cools assures the adhesive bond is reestablished at the highest level of surface contact.
Also, the boards will need to be sanded before and after the primer is applied with steel wool or 220 grit sandpaper. A final cleaning prior to application with a 50% mix of water and isopropyl alcohol will insure that the paint is dust free and ready for installation. Once the cleaning mix has dried (for about 20 minutes) the application may commence.
Looking for a different size or a
whole different design?
We do CUSTOMS!!
Contact us for details!
Wall Decals
Car & Truck Decals
NFL Football Decals
NHL Hockey Decals
NBA Basketball Decals