The installation consists in plugging into the loudspeaker wires coming from the radio or directly next to the loudspeakers. The converter assembly does not require disconnecting the speakers connected to the radio.
The converter guarantees a high-quality output signal. Extremely durable, resistant to overheating housing.
(High frequency output = speaker output)
(Low frequency output = amplifier output)
Technical data:
Transmission ratio from 3.6: 1 V (input) max 14V Suitable for radios with output power: max 40W (music) for one channel min 5W (music) for one channel
Connection: Input 8 loose wires
4 gold-plated RCA inputs
ASSEMBLY:
Set potentiometer knobs to min.
Connect the wires
- green (+) wire to left rear + speaker
- green (-) wire to the left rear speaker -
- gray (+) wire to the rear right speaker +
- gray (-) wire to the right rear speaker -
- white (+) wire to the right speaker front +
- white (-) wire to the right rear speaker -
- yellow (+) wire to the right speaker front +
- yellow (-) wire to the right rear speaker -
Turn on the radio by giving an external signal to the wires.
Adjust the appropriate signal value with potentiometers.