This fixed price listing is for 1 x GENUINE SEKO NPG04 rinse aid dosing pump as shown.
The pump kit is supplied in original manufacturers packaging complete with all installation fixings, hoses and installation instructions. The NPG04 is rated at 0.4 litres per hour and is non-adjustable, these pumps are usually fitted to budget machines or machines where the dosing level control is built in to the machine. Fitted with Sekobril pinch tube for resistance to rinse aid chemical detergents. Seko are recognised as the leading manufacturer of dosing pumps and are the chosen supplier to most leading warewashing brands including Classic, Meiko, IME Omniwash and many others.
We stock an extensive range of Seko pumps that can be fitted to most popular warewashing machines, see our shop for the full range pumps and Seko spare parts. Spare pinch tubes and roller bearings are available in our shop. This kit is supplied with 2 wires attached for easy connection to 230v 50/60Hz electrical supply, top mounting bracket, tubing, foot filter and tank connector. Total dimensions of this unit are approx 70mm wide x 100mm high x 70mm deep, the compact size allows for easy location in the control panel of most machines.
Control: without control
Pump rate: 0.4l/h
Application: rinse aid
Type: PG
Voltage: 230V
Voltage type: AC
Hose connector: 4x6mm
Hose type: Sekobril
Manufacturer: SEKO
Dimensions: 67x95x52mm
Suction level: 1.5m
Mounting: horizontal/vertical
Also suitable replacement for the following OEM part numbers:
049311 ALPENINOX
049625 ALPENINOX
0L0697 ALPENINOX
0S0704 ALPENINOX
049311 ELECTROLUX
049625 ELECTROLUX
0L0697 ELECTROLUX
0S0704 ELECTROLUX
775556-11 HOBART
NPG030HA2000 SEKO
PPG030HA2000 SEKO
049311 ZANUSSI
049625 ZANUSSI
0L0697 ZANUSSI
0S0704 ZANUSSI
PLEASE NOTE: Chemical dosing pumps are not supplied with any warranty, if you have a fault with your existing pump then you need to establish what caused the pump to go faulty before replacing it with the new one, you may have an underlying fault that has led to the failure of the pump and if not rectified could cause the same fault with the new pump. Parts should always be diagnosed and installed by a suitably qualified person, if incorrectly installed, over run or allowed to run dry they will suffer irreparable damage, for this reason we cannot offer any warranty on dosing pumps.
If you require any other spare parts or accessories for your appliance visit the Pumps & Dosing section of our ebay shop. Please visit our ebay shop to see our huge range of catering parts.
