eBay

This is a brand new Takeda Air Intake System. We are an Authorized Dealer of Takeda and carry the full line of products.

The Takeda Retain Intake is a short ram air intake system. In recent testing this intake produced 13 hp and 15 lbs. x ft. of torque on a 2004 Coupe w/automatic transmission. This unique intake design utilizes the front of the stock air box to ensure colder air intake temperature to the filter. Takeda also completed additional testing on cold air intake systems both developed in-house as well as other competitors in the market and found that the cold air intake systems were producing much higher intake temperatures. This was due to insufficient fresh-air flowing through the lower portion of the bumper and trapping the unwanted heat coming from the engine.

Takeda intakes are constructed out of lightweight clear coat anodized tubing for maximum air flow and a great style. Each intake uses a large 360 degree high flow PRO Dry S air filter for maximum flow, filtration and convenience. The PRO Dry S air filter requires no oils and cleans with simple soap and water. This Takeda intake comes complete with all tubing, filters, couplers, 3-angle adaptor, wrinkle black air box cover, and hardware for an easy installation.

Note: This intake does not fit with a circular mass air flow sensor.

Fits the following applications:

'04-'06 Infiniti G35 Sedan 3.5L V6*
'03-'06 Infiniti G35 Coupe 3.5L V6*

*Rectangle Mass Air Sensor Only

Part #: TR-3001P

Finish: Polished

Intake Type: Retain Short Ram

Gain up to 13 HP & 15 lbs x ft. Torque

Takeda is a division of aFe, Advanced FLOW Engineering. aFe leads the automotive aftermarket in Filtration, Intake, Exhaust, and other bolt on performance products across a wide range of applications from BMW to Dodge Diesels. Based in Southern California with a strong tie to Japanese tuning, Takeda products are designed for the progressive automotive enthusiast that is performance driven.

Flowing from the company’s philosophy of highly engineered performance products, all Takeda products are developed in a state of the art factory by experienced airflow engineers, utilizing digital measuring, rapid prototyping and real world dyno testing for optimal performance and original factory fit and function. All Takeda intakes will be built using polished aluminum tubes and featuring an anodized maintenance-free clear coat. Takeda filters are flow bench tested to the highest standards and all intake pipes are computer modeled for maximum efficiency before dyno testing.

Takeda will serve its products to the premium automotive enthusiast that is focused on quality, performance and style. To showcase these products, Takeda will have a full video on each and every one of its intakes for enthusiasts to see the product in use on their vehicle before they install it on their own vehicle. Takeda will offer three variants of intakes including: Attack, a cold air series; Retain, a short ram intake; and Link, a combination short ram and cold air intake that can be converted to either style in minutes. Each kit comes with a filter utilizing aFe’s Pro Dry S technology. Pro Dry S Filters feature an oil-free element with deep pleats and superior airflow and filtration at 99.4% efficiency.

Attack is the Takeda Cold Air lineup. These intakes put the filter behind the front bumper, where the intake can ingest cold, dense air. All Attack version intakes come complete with Takeda's Synthetics Pre-Filter.

Retain is the Takeda Short Ram lineup. These intakes create simple, bolt-on horsepower that requires simple, quick installation and no bumper removal. Some of the short ram intakes include a wrinkle black heat shield.

Link is the Takeda Conversion lineup. These intakes are cold air intakes that can be converted into a short ram intake, simply by removing the secondary portion of the intake system and relocating the filter to the primary intake tube. All Link version intakes come complete with Takeda's Synthetics Pre-Filter.

Takeda Air Intake Systems use a revolutionary new Pro Dry S Filter Media that works without filter oil. This media is easier and faster to clean than traditional foam, and requires no costly and messy solvents or oils. Takeda filters can be cleaned in a matter of minutes and are ready to use after only a couple of hours of drying time. Unlike pre-oiled or disposable filters, Takeda Filters are Lifetime Filters that will last as long as you own your vehicle.

Takeda Pro Dry S Filter Media Features:

	Manufactured and assembled in the USA
	Media Type: 2 Layer Synthetic
	The outer screen provides strenth and prevents damage to the filter media.
	High-efficiency thin layer traps remaining dust particles without slowing airflow.
	Thick layer slows air velocity so that dust particles fall out of suspension and become trapped in fabric fibers.
	Inner screen provides support and quality without the need for additional internal structures.

Payment Information:

Payment Options: Paypal and any major credit cards using Paypal.
Sales Tax: Items shipped in Arizona will be charged 8.1% sales tax.
Payments must be received within 10 days from the date of purchase. All non-paying bidders will receive negative feedback. Please contact us if payment cannot be made so we can work out the situation.

Shipping Information:

UPS Ground shipping is free to the lower 48 states, excluding Alaska, Hawaii and Puerto Rico. Additional shipping charges apply to Canadian and all other international shipments. Please contact us before purchase for a shipping quote to your location.

Most items will ship within 24 hours from the time payment is received. Shipments are not made on Saturdays or Sundays.

Tracking #'s will be provided at the customers request. Allow 24 hours for the tracking # to be sent.

Express shipping available at the buyer's expense, please contact us for prices to your location.

Any back-ordered or out of stock items will be shipped immediately after the item becomes available.

Shipping unavailable to PO boxes.

Return Policy:

AZ Off-Road & Performance, Inc. will do everything possible to ensure the customer's satisfaction.
If there is any error in the part received, please contact us immediately.
Returns will be accepted if the item is unused, uninstalled, in the original packaging and in brand new condition. Items that are defective may also be returned. We are not responsible for install mistakes. Items must be returned within 30 days from the purchase date.
All returns must be approved and issued a RA # for return. The RA # must be on the outside of each package with the RA # in a visible area. Any package without the RA # will be refused.
Buyer is responsible for shipping charges on returned items and to insure the package.
Returns may be subject to a 20% restocking fee.
Once items have been received & inspected per our guidelines, a credit will be issued to the customer .
Cancellations: Any cancellation must be approved prior to shipping. Any item that has already shipped must be returned according to the guidelines stated above.