To all my Students and Subscribers,
Wooden Movement Mantel Clocks made between 1780 and 1820 were the result of the war effort needing brass. Wooden Clocks became the norm until metals were again available for household clocks.
Engineers found certain woods outperformed others depending on its application. Plates were made of 1/4 sawn Oak or Mahogany, Apple for Wheels, Maple and Birch for Arbors and so on.
Very few of these Clocks made it into our time due to where they were used. On a fireplace mantel used everyday for heating and cooking. The wood dries out and teeth begin breaking off. Also when brass movements were once again available, they would discard the wooden movement. The ones that did make it to our time deserve the best treatment to bring them back into operation. I hope you will consider bringing them back to life.
When was the last time you picked up a clock and wondered what it'd be like to repair it. What is it that clockmakers know that seems Magical? How hard could it be to learn? Could I really do this?
At less than half the cost of other Training Video's you can experience it for yourself. The video puts you closeup at the workbench instructed every step of the way. Each video takes you from start to finish on a specific clock so your not flooded with information applicable to other clocks. My teaching philosophy, I want to amaze my students with how much they can learn in a shorter amount of time.
Here is your chance to repair one of the most Collectible and hardest to find Clocks out there. Manufacturers switched to Wood and spent years designing a precision clock from a non-precision material. Oak, Mahogony Apple, Birch were used in different area's due to their unique properties. All woods were cut in a quarter sawn fashion which eliminates warping as the wood swells and expands due to temperature and humidity changes.
The Eli Terry 8 Day Mantel Clock with Wooden Movement is very rare. My video will show you the Overhaul/Repair process from Start to Finish. Many teeth needed to be replaced and pinions were worn and broken, pivots and bushings were replaced, 200 years of old repairs needed to be removed and re-done. This clock will be your labor of love. My video is over 7 hours long to show you each step.
Preview Video: http://www.youtube.com/watch?v=pOCd2uWnAX4&list=PL0C2F2DD67C311A07
To see all of my Video's and Tools on Ebay, Click
http://www.ebay.com/sch/al_taka3/m.html?_trksid=p3692
Please Join the National Association of Watch and Clock Collectors at nawcc.org
Let me show you what it would be like to pickup a Clock and see in your mind how it works, the many wheels turning so slowly that it takes a week or more to unwind. Taking it a step further, how could these wheels be made to run so precisely and why do they stop after so many years of running. You'll begin to recognize the worn area's and know how to repair it back to original health. This is what I show and explain in my Video's.
Video Preview's and Technical Tips available on my YouTube Channel: http://www.youtube.com/user/altaka1
There are hundreds of Clocks waiting to be repaired and you'll find them at yard sales, auctions and even your own attic or basement. Increase their value and beauty so they can be enjoyed by the next generation.
I created this Movement Specific Video to help you through the repair process and theory of clock movement operations. I explain the repair process by putting myself in your position. This movement is used in several different clock cases. Many techniques learned here are similar in other Movements.
I'll show you the steps such as Examination, Splitting the plates, Cleaning and polishing the working components, Repairs as needed such as Bushing Work, Assembly and timing of the Strike Train.
As I add more Repair Video's you can keep track of them by Subscribing to my Youtube Channel.
Included in this auction is 2 DVD Disks and Protective Sleeves
So sit back, review the Video and begin your Movement Repair
Al Takatsch
Jefferson ClockWorks
***
Make yourself a Gift of my Video's and see a new world of how things work and a Hobby you will never forget.
Hi Al, I can't thank you enough for this great video on repairing a wooden movement!! So far everything is going great and as you can see by the pic. I just molded my first wooden clock teeth. What a great way to do this!!!!!!!! I know it's only two teeth but hey you gotta start some where!! thanks Al
***