The N103455 Viton® Rubber Grommet will not be Black!

If you are buying a Grommet that says it is a N103455 and it is Black then you are not getting a the Viton® Grommet.
The Viton® Grommet will either be Orange or Green!

The N103455 Longer lasting Viton® fuel tank Grommet and is the best choice when using any type of harsh chemicals or today's gasoline and diesel fuels.
This viton Grommet does not get soft and deteriorate like the Black Rubber GS-0446 Grommet does.

The N103455 Viton® Rubber tank grommet can be used on the GS-0650, GS-0650-, GS-0650-1 four gallon generator gas fuel tanks as well as the GS-0444, GS-0795 and the Z-GS-0795 seven gallon generator gas fuel tank that was used on generators made for DeVilbiss, Porter Cable, Ex-Cell, Porter Cable, Sears Craftsman, Titian as well as other privately labeled generators with the plastic 7 gallon fuel tanks.


Installation Instructions for Viton® Grommet

  1. Make sure hole in your tank is free of any debris.
  2. Soak the new Viton® Grommet in “Hot” water for 5 minutes to ease with installation.
  3. Insert Grommet (small end first) into the hole in your tank.
  4. Push Grommet firmly into place and make sure the grommet is seated against the tank body.
  5. Coat in inside of the Grommet with a light coat of 10-30 oil or similar motor oil.
  6. Slowly and firmly push the fuel fitting through the center hole in the new Viton® Grommet




The range of chemicals to which Viton® fluoroelastomer is resistant is one of the broadest in the industry. DuPont has introduced several Viton® products that will give the compounder a greater flexibility in formulating parts requiring chemical resistance.


Viton® fluoroelastomer is the most specified fluoroelastomer, well known for its excellent (400°F/200°C) heat resistance. Viton® offers excellent resistance to aggressive fuels and chemicals and has worldwide ISO 9000 and ISO/TS 16949 registration.




Warning:


Never service your generator while the engine is still hot


Severe burns and bodily injury could occur.

 

 

For any addition information please contact our office by email through our eBay store and one of our customer service agents will respond to your question in a timely manor.

 

Our customer service department is available to answer parts compatibility questions by email Monday thru Friday from 10am to 4pm Central standard time.

 

We do not offer technical service for repair of any type of equipment and have limited access to replacement parts.

 

The most common replacement parts will be listed in our store and if what you are looking for is not listed in our store we will not be able to provide any additional non listed parts.

 

 

Stated return Policy:
 

All parts and equipment purchased on eBay are purchased by the buyer with no additional promises being made for technical service or installation support.

If the item purchased is found to be defective the customer may send the part back for inspection from S.A.W. Inc, if the returned part is considered to have a material defect S.A.W. Inc will send the customer at no charge a replacement part.


Items that are not opened, installed or used may under authorized conditions be returned within 14 days for a partial refund less the actual shipping cost paid by S.A.W Inc and a 20% restocking fee.

All return shipping cost will be the sole responsibility of the buyer and will need to be paid by the buyer, any product returned with freight or postage collect charges will be refused and not accepted.

The original shipping cost covering the items shipment to the buyer is not refundable for any reason as this was agreed to in the initial sale of the product and is not part of the actual value of the item in question.


If you are claiming the part arrived damaged in the package the package must not be opened in order to be able to send the part back for an exchange. Opened packages will not be accepted for returns.


Parts or Equipment that has been used or installed in any way will not be accepted for any type refunds or money back.

There are no returns or refunds on any electrical parts and warranty replacement parts must be sent in for inspection before any warranty replacement part will be shipped by S.A.W Inc.


These items will need to have a Returned Good Authorization number “RGA” with the product being returned in order to be accepted for return.

By purchasing any parts or equipment from S.A.W. Inc you agree to these terms and conditions.


Additional Company Information:


When any item is sold on eBay the seller incurs cost associated with this sale such as insertion fees, various listing fees as well as a final value fee based on a specific seller ratings system.


These along with a Pay Pal transaction fee is the reason we try to make sure our listing are as accurate and descriptive as possible in order to prevent the wrongs parts or equipment from being ordered.

Please be sure of the parts or equipment you are ordering before placing your order and if you are not sure the listed part is correct please contact our customer service department by email before ordering your product from our eBay store.

If however you do experience a problem with any of the products or services you have received from us please contact our customer service department by email through the eBay site with the products eBay item listing number so we can resolve any type of discrepancies and continue to provide excellent customer service.



Additional Checkout Instructions


All parts and equipment purchased from S.A.W Inc will do our very best to ship all products purchased to your location the same day or the next business day excluding Saturdays, Sundays and Holidays, after payment is received and cleared through PayPal from one of our several locations and vendors.

Tracking information may not be immediately available for some products purchased.

Please contact us through our eBay contact with any questions about any transactions.