This fixed price listing is for 1 x Rinse Aid Injector as shown.
Used on various makes of machine such as Ime Omniwsh Sowebo Classic dish washer and glass washers, this rinse aid injector uses a back pressure connection from the wash pump via a 10mm diameter nipple at the rear of the doser, chemical inlet and outlet tubing is approx 6mm diameter, total length is approx 155mm, height is 56mm, depth including nipple and adjusting screw is approx 110mm
Suitable for various makes and models of appliances including:
Dishwasher (NUOVA SIMONELLI) LTSFX
Glasswasher/Cupwasher (NOSEM) C4010L
Also some models of Dishwasher IME OMNIWASH, CLASSIC, CLASSEQ, SOWEBO
Auxiliary pressure connection: 10mm
Suction connection: 6mm
Pressure connection diameter: 6mm
Application: rinse aid
CHEMICAL PUMPS PLEASE NOTE: Chemical dosing pumps are not supplied with any warranty, if you have a fault with your existing pump then you need to establish what caused the pump to go faulty before replacing it with the new one, you may have an underlying fault that has led to the failure of the pump and if not rectified could cause the same fault with the new pump. Parts should always be diagnosed and installed by a suitably qualified person, if incorrectly installed, over run or allowed to run dry they will suffer irreparable damage, for this reason we can not offer any warranty on dosing pumps.
Also suitable replacement for the following OEM part numbers:
DSAM3 IME OMNIWASH
DSAM3NT IME OMNIWASH
DSAM3NTGR IME OMNIWASH
DSAM3NTSPL IME OMNIWASH
DSBM3 IME OMNIWASH
DSBM3NT IME OMNIWASH
3229 LASA
3929 LASA
18010067 NUOVA SIMONELLI
18011100 NUOVA SIMONELLI
100731 SILKO
DSAM3 SO.WE.BO.
DSAM3NT SO.WE.BO.
DSAM3NTGR SO.WE.BO.
DSAM3NTSPL SO.WE.BO.
DSBM3 SO.WE.BO.
DSBM3NT SO.WE.BO.
P70C SOLYMAC
