This system is ideal for removing heavy metals, fluoride and arsenic, which cannot be removed normally through filtration alone. The combination of special media makes this the most efficient in the market for delivering pure drinking water.
1st Stage - Fluoride/Arsenic is not normally removed through the filtration process. It can be removed through reverse osmosis, this filter is designed to remove the fluoride through filtration using Activated Alumina. Activated alumina (AA) is the only filter material specifically designed to remove fluoride and arsenic from water. A ceramic compound made of aluminum oxide with a very high surface-area-to-weight ratio, AA has a very high capacity for fluoride adsorption. Most municipal water supplies add 2 ppm (parts per million) of fluoride. AA filters can reduce fluoride concentrations to below .1 ppm, or down to 99% of the normal fluoridated water level. If you are concerned about these contaminants in your water supply, this is the ideal low cost system for you.
2nd Stage - Carbon is a substance that has a long history of being used to absorb impurities and is perhaps the most powerful absorbent known to man. One pound of carbon contains a surface area of roughly 125 acres and can absorb literally thousands of different chemicals. Activated carbon which has a slight electro-positive charge added to it, making it even more attractive to chemicals and impurities. As the water passes over the positively charged carbon surface, the negative ions of the of the contaminants are drawn to the surface of the carbon granules. When combined with KDF, the effectiveness of the carbon's life is extended.
KDF works by the redox (oxidation reduction process) like this: KDF Fluid Treatment unique combination of copper and zinc creates an electro-chemical reaction. During this reaction, electrons are transferred between molecules, and new elements are created. Some harmful contaminants are changed into harmless components. Free chlorine for instance , is changed into benign, water-soluble chloride, which is then carried harmlessly through the water supply. Similarly, some heavy metals such as copper, lead, mercury and others, react to plate out the mediums surface, thus being effectively removed from the water supply. Carbon
also removes - Volatile organic chemicals, or VOCs, are often toxic
chemical compounds used industrially that may be present in water
sources. A variety of fuels, solvents, coatings and refrigerants are
volatile organic chemicals. Activated charcoal effectively traps and
absorbs many different VOCs. Chlorine - No other filter removes chlorine
and its accompanying odor and flavor as well as an activated charcoal
filter. Most municipal water sources are treated at one or more stages
with chlorine to kill bacteria. Pesticides - The Environmental
Protection Agency lists activated charcoal filters as the only way to
reduce pesticide quantities in drinking water. Many different pesticides
used today are leached into our water sources and cause contamination.The carbon ensures a sparkling pure water taste.
Q: Why don't filtration systems reduce TDS?
A: “Filtration” systems are designed to
selectively remove contaminants and to leave in dissolved trace minerals such
as calcium and magnesium. These water-borne minerals are healthful and give
water a more natural flavor. Systems that remove minerals lower the pH of water
and cause it to be more aggressive. Low pH water will seek to balance itself by
leaching elements such as copper, lead or aluminum from plumbing fixtures and
cooking utensils. Cooking in de-mineralized water will also draw the minerals
from your foods causing a reduced nutritional value. Water with a balanced
mineral content has a much less tendency to take on foreign elements. TDS (total
dissolved solids) is primarily made up of dissolved minerals and is not related
to harmful contaminants. A TDS tester is for testing the efficacy of a reverse osmosis system. not a filtration system.
Q: Why would the filtered
water from the unit appear cloudy sometimes?
REFUND WITH IN 14 DAYS OF DELIVERY.ITEM MUST BE SEND BACK WITH IN 14 DAYS OF DELIVERY, USED OR INSTALLED ITEM IS NOT RETURNABLE, FILTERS OR MEMBRANES MUST BE IN ORIGINAL SEALED WRAPPING. INSPECT YOUR ITEM CAREFULLY UPON DELIVERY, If there is damage to the product due to shipping, please keep all your package in addition to the products. Email us to get the claim process started. Once installed or used, product is not returnable/refundable however our systems carries a one year limited manufacturer defect warranty (filters excluded), please email us for complete warranty information. Any other reasons for return, buyers will have to pay the actual shipping cost to ship the item back. Minus the original shipping cost will be refunded. If the product is defective, please contact us first to resolve the issue before the product is returned. We request that the buyer works with us in good faith to resolve any issues. We may wet test our light commercial/commercial units prior to shipment for quality control purposes which may delay shipping by 2 business day. Please email us first if you have any issues with your purchase.
International Buyers – Please Note:
Import duties, taxes ,brokerage fees and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up – do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as "gifts" - US and International government regulations prohibit such behavior. International buyers need to know they may be responsible for customs fees and experience longer shipping times due to customs-related delays.