This fixed price listing is for 1 x SIT Gas Thermostat Valve as shown.
Suitable for various makes and models of appliances including:
Fryer gas (ANGELO PO) - Series JUNIOR - Series SENIOR
Sit valves can be identified by the number printed on the rating plate of the valve. These valves combine a thermostat and flame failure device in one unit. Operating Temperature range on this thermostat is 110-190 degrees centigrade. The capillary length is 1050mm. The bulb (sensor) size is 13mm dia x 26mm long this unit has a special type of bulb please look carefully at the below pictures before purchasing.
Please note that our valves are purchased direct from Sit and are an 'off the shelf' product to Sit's own basic specifications, please note that some valves fitted to appliances may have been modified by the individual equipment manufacturer to suit their own particular appliance.
Manufacturer: SIT
Suitable for: MINI-SIT
Sensor type: F3
Probe length: 26mm
Probe diameter: 14mm
Capillary length: 1050mm
Temperature range: 110-190°C
Thermocouple connection: M9x1
Gas outlet: 3/8"
Gas input: 1/2"
Type series: 710
Version: with pressure controller
Please see picture of data plate for exact technical specifications.
Also suitable replacement for the following OEM part numbers:
33A0170 ANGELO PO
33A1370 ANGELO PO
33Z0300 ANGELO PO
0100871 SILKO
0.710.752 SIT
0.710.754 SIT
0710752 SIT
0710754 SIT
IMPORTANT - WARRANTY / RETURNS / SAFETY INFORMATION -
Please note that specialist gas components are not for diy type installation by an unqualified person, we do advise that any gas parts are only diagnosed, installed and tested by a suitably qualified engineer. It is illegal to carry out works to a gas appliance if you are not qualified to do so. Due to the rise in DIY style repairs most manufacturers will no longer entertain any faulty new item claims for spare parts that have been installed by none qualified or trained engineers. If any spare parts are reported as faulty from new and require returning to the manufacturers for inspection or replacement they now insist on having an engineer’s report detailing the model and serial number of the appliance and the technical nature of any fault reported. Any warranty or fault report claims can only be accepted if the claim is supported by an engineers report and any installation works are completed by a qualified gas-safe registered engineer. In order to complete a warranty claim we would need the gas-safe details of the engineer and the details of the appliance it has been installed on.
If you need any clarification at all or require assistance finding a suitably qualified engineer in your area please contact us and we will try to help if we can.
If you require any other spare parts or accessories for your appliance visit the SIT section of our ebay shop. Please visit our ebay shop to see our huge range of catering parts.
