It was developed by the Ukrainian engineer UR3LMZ especially for Ham radio. Many Ham's around the world use this transverter a board and were convinced of his excellent work.
With this transverter you can operate on the 70 mhz band using any type of the HF radio at 28 mhz.
This item very nice working with SDR and FLEX radios with a spectrum Waterfall.
Complete with tested and adjusted in laboratory the transverted board has the english description which contains the circuit of the transverter and the circuit of the simple attenuator board.
Information about this transverter:
- RF range 70 ... 72MHz
- IF range 28 ... 30MHz
- DC current is 12V to 14V.
- Current consumption 2A (TX)
- LO freq is 42MHz
- LO freq stability +/- 3ppm
- IF RF input power on 28mhz is about 1 to 100mWt (0.1Watts).
- TX Output transistor is RD16HHF1
- The Output power on 70 mhz is about 10 to 15W
- RX Input transistor is BF998
- RX gain 20dB
- Noise figure 1.0dB
- Image regection 70dB
- PTT to the ground.
- Size of the board is 8cm x 4.5cm
To get the transverter worked you have to do some soldering works with a cables, wires and connectors. Probably some instruments would be required. Does not include the interface module, heatsink, power and RF connectors, wires or cables.
I am testing the transveters before putting them in a shipping box. If you would not be satisfied with the transverter board then you ship it back and I refund your money.
To byu full compllete TRANSVERTER KIT (transverter board, attenuator board, all connectors and etc.) or COMPLETE READY transverter see here