This fixed price listing is for 1 x SIT Gas Thermostat Valve as shown.
Fryer gas valve as used on various commercial fryers, pasta boilers and other appliances including Falcon, Mareno, Zanussi and many others. The valve is rated at 120 to 200 degrees, Inlet 1/2" BSP, Outlet 3/8" BSP, Thermocouple connection M9x1, Capillary length 1050mm, Bulb (sensor) is 6mm dia x 110mm long, M14 Compression stuffing gland on capillary. This unit is supplied with the plastic body and control knob.
These valves combine a thermostat and flame failure device in one unit.
Sit valves can be identified by the number printed on the rating plate of the valve. These valves combine a thermostat and flame failure device in one unit.
Please note that our valves are purchased direct from Sit and are an 'off the shelf' product to Sit's own basic specifications, please note that some valves fitted to appliances may have been modified by the individual equipment manufacturer to suit their own particular appliance.
Manufacturer: SIT
Suitable for: MINI-SIT
Probe length: 110mm
Probe diameter: 6mm
Capillary length: 1050mm
Temperature range: 120°C - 200°C
Thermocouple connection: M9 x 1
Gas outlet: 3/8" BSP
Gas input: 1/2" BSP
Type series: 710
Gland Thread: M14 x 1.5
Please see picture of data plate for exact technical specifications.
Also suitable replacement for the following OEM part numbers:
0710743 SIT
IMPORTANT - WARRANTY / RETURNS / SAFETY INFORMATION -
Please note that specialist gas components are not for diy type installation by an unqualified person, we do advise that any gas parts are only diagnosed, installed and tested by a suitably qualified engineer. It is illegal to carry out works to a gas appliance if you are not qualified to do so. Due to the rise in DIY style repairs most manufacturers will no longer entertain any faulty new item claims for spare parts that have been installed by none qualified or trained engineers. If any spare parts are reported as faulty from new and require returning to the manufacturers for inspection or replacement they now insist on having an engineer’s report detailing the model and serial number of the appliance and the technical nature of any fault reported. Any warranty or fault report claims can only be accepted if the claim is supported by an engineers report and any installation works are completed by a qualified gas-safe registered engineer. In order to complete a warranty claim we would need the gas-safe details of the engineer and the details of the appliance it has been installed on.
If you need any clarification at all or require assistance finding a suitably qualified engineer in your area please contact us and we will try to help if we can.
If you require any other spare parts or accessories for your appliance visit the SIT section of our ebay shop. Please visit our ebay shop to see our huge range of catering parts.
