TOPHAT ARCHERY-TopHat® Protector BR 2 Bullet 80gn
TopHat®Break-Off
TopHat®Break-Off is a standard arrowhead
equipped with one or more break-offs at its end. This break-off system
gives high flexibility for arrow tuning.
Shape:
3D - Shape:
That
especially for 3D animals/targets designed shape is characterized
through its high effectiveness. In comparison with other arrowheads this
3D shaped arrow point enters more aggressive and strait into the
target. Through the shape of the arrowhead there is a high resistance of
diversion. This leads to less tension and therefore more protection for
the shaft. The shape prevents rebound on the surface of the target.
Material:
Stainless steel (VA):
The
material stainless steel is corrosion-resistant. It stays long term
resistant against weather and other external circumstances. It is
possible to regrind the material at any point.
TopHat®Break-Off Technology:
TopHat®Break-Off
points conform the standard arrowheads for carbon arrows with the
feature that it is possible to tune the weight.
The grooves for the
glue, at the shaft of the head, are purposely low- shaped. This prevents
the usage of too much glue. Wrong spread glue can cause imbalance.
Installation:
After about 60 seconds the TopHat®Break-Off point sticks perfectly
together with the carbon shaft (with TopHat®Bond). Beforehand the carbon
shaft has to be whet from the inside and cleaned with a solvent. 1-2
drops of TopHat®Bond onto the shaft of the head and push in a rotating
movement all the way until it is tight fastened.
Run- point accuracy of the arrow point: 0.006 µ
Break-Off:
The head has one or more break-offs at its end. These break-offs can be broken off at leisure to get the ideal arrowhead weight.
Special
insertions at the break off area make sure that the tolerance of the
weight, after breaking- off a part, is absolutely slight.
To agglutinate the TopHat®Break-Off-Points we recommend TopHat®Bond.
MORE ARCHERY RELATED PRODUCTS ON THEIR WAY!