6 Gauge AWG custom made battery cable assembly which includes your choice of lugs crimped to the wire with adhesive lined heat shrink to seal the connections. 

Your choose your wire color, length, and lugs from the options above near the purchase buttons. The copper lug connector (ring terminal) choices are 1/4, 5/16 or 3/8 with adhesive heat shrink tubing applied as follows:

  • Black cable gets Black Heat Shrink
  • Red cable gets Red Heat Shrink

The heat shrink has a melt-able glue lining to help seal your cable from air and moisture. The copper lugs feature a tin plating which is resistant to corrosion you'll see on bare copper ring terminals.

If you need something special with regard to the length or lugs outside the available options please send us a message and we may be able to help you out.  

ABOUT THE WIRE USED:

Introducing our multi-rated, multi-purpose, flexible, real copper battery cable. This wire has multiple approvals for use in many electrical installation making it a very unique cable. From the pure electrolytic copper stranding with electro-tin plating to resist corrosion and oxidation...  to the durable yet flexible insulation, this cable has been designed to impress. 

Our UL listed battery cable carries ratings allowing it to be used as marine battery cable listed as UL1426 Boat Cable which maintains a BC-5W2 temperature rating of 105C dry and 75C wet. This wire can be continuously submerged in water with no issues. This fine battery cable exceeds the requirements of ABYC and the USCG (US Coast Guard) for installation on boats.

The copper conductor features stranding which is tin plated to resist corrosion. Flexible Type III, Class K stranding is designed to absorb vibration found in motive environments such as automotive and marine thus protecting the cable from premature failure.

FEATURES:

  • Meets all applicable boat wiring regulations from ABYC, UL1426,and US Cost Guard for use on boats
  • Rated 600 Volts Max with 105C Dry and 75C Wet (BC-5W2) temperature ratings and will remain flexible in extreme cold weather
  • Jacket and insulation are resistant to oil, gas, fungus, salt water, battery acid, heat, abrasion and sunlight
  • Multiple ratings including - BOAT CABLE (UL1426),  MTW (machine tool wire), AWM (Appliance Wiring Material) and CSA TEW
  • Carries UL VW-1 Flame Resistant Rating
  • Is ROHS Compliant
  • MADE IN THE USA!!!

Battery Cable Specifications:

Wire Size     Nominal     Stranding   Weight     Amp Rating
 (AWG)       O.D.(Inch)     Count       LBS/FT    Continuous*
    8              0.249         168            0 .070           80
    6              0.324         266            0.114           120
    4              0.386         420            0.164           160
    2              0.437         665            0.251           210
    1              0.518         836            0.333           245
   1/0            0.563         1064          0.403            285
   2/0            0.615         1330          0.500            330
   3/0            0.670         1672          0.614            385
   4/0            0.740         2109          0.765            445

*Per ABYC/USCG (Inside of engine space de-rate amps shown by 15% due to extra heat)

Final pointers on lug sizing....many standard threaded stud batteries will have either a 5/16 or 3/8 inch stud. Most of the time the negative will be 5/16 so if the positive is the same size it is also 5/16, but if your battery stud is larger on the positive it will most likely be a 3/8.  There are exceptions to the rule so please contact the manufacturer or measure. You can search online for bolt sizing tables which will help. Smaller batteries like golf cart and PWC batteries often use a 1/4 bolt. Please double check your needs BEFORE ordering