- 100% Local Stock
- Buy with confidence
- Fast Delivery
- Technical Support
- Pickup Available
Brunswick, VIC Australia
This item is out of stock!
New stock arrives end of July
Premium and Universal Car Blind Spot Assist (BSA) System View
Sensor Size: 22mm
Sensor Colour: Matte Black (Paintable)
After briefly checking the inside and outside mirrors and perhaps a fleeting glance over your shoulder, you are suddenly given a severe fright by the loud hooting as you pull out to overtake. It is easy for a driver to fail to spot a vehicle approaching from behind in the overtaking lane or a vehicle situated in the blind spot next to your car, particularly in heavy traffic on multi-lane freeways.
This is where the Masten Blind Spot Detection (MBSD) system can take much of the strain off the driver and avoid hazardous situations by monitoring the area that is hard to see.
The Masten Blind Spot Detection (MBSD) System uses ultrasonic technology to continuously monitor the driver's blind spots for nearby vehicles and provide a warning of potential dangers.
Please note these sensors are only for Plastic bumpers or guards.
Overview
Blind spot detection technology:
When driving forward, sensors monitor blind spots and interior warning lights show the relevant side of the potential danger, keeping you, your passengers and road users safe.
Sonar Technology:
Sonar sensors detect obstacles in blind spots in a 3m x 3m area and within 120 milliseconds of the obstacle triggering the sensor. When a vehicle enters your blind spot, corresponding warning lights alert you of impending danger and if proceeding to indicate, an audible sound will also alert you.
Keep your eyes forward:
Without blind spot sensors, the only safe way to check a blind spot is to physically check over your shoulder, causing you to take your eyes off the road while driving. Blind spot detection means you can keep your eyes forward longer and safely on the road.
Key Features
- Two rear bumper sensors (paintable)
- Two LED indicators (for installation inside of vehicle)
- Alarm unit (for audible warning of a vehicle in your blind spot)
- A complete wiring harness for plug and play installation (some wiring connections are required)
- Maximum detection range: 3 metres (when on "Normal" mode, less when on "Low" mode)
Installation:
Each MBSD kit includes ultrasonic sensors, wiring harness and visual warning indicators. No calibration is required by the installer.
System self-checking:
The system includes self-diagnostic functions to provide feedback to the driver of correct system operation.
Vehicle Aesthetics:
The MBSD sensors and wiring harness are all located within and behind the vehicle rear bumper fascia. There are no components visible to the driver except the visual warning indicator on the A-pillar trim.
Manual
Contact us
Overview
- Masten Ultrasonic Blind Spot Detection System with 2 Year Warranty
- The system determines whether a vehicle is in an actual blind spot rather than alerting you when a vehicle is to the side of you
- Identify non moving objects like stationary vehicles, curbs or poles
- Ultrasonic technology to detect threats in less than 120 ms
- Installs in virtually all modern vehicles using a 12V electrical system
- Wire system hookup for easy installation
- Two rear bumper digital sensors
- Two in-car LED flash indicators for visual alerts ,
- Alarm LED dispaly with speaker for audible warnings when turn signal is activated
- Wide alert range covers most blind spots
- Pre-set raneg of 0.3-2.5m which is the best distance for the sensor sensitivity and accuracy
- Suggested install height of 70cm from ground
- Superb Hole-saw for sensor installation
- Wire harness included for a quick plug and play installation
| SKU | BS-01 |
| Brand | Masten |
| Shipping Weight | 0.8400 |
| Shipping Width | 30 |
| Shipping Height | 6 |
| Shipping Length | 20 |
We ship items out as soon as possible, but this will not always be the same day as your order. In general, please add 2-3 business days to allow for processing time. If we anticipate a longer lead time, it will be noted in the item description or you will be advised before we dispatch your order. If you have any questions about the lead time on a specific item, please contact us. If you wish to Pickup, please contact us before purchase.
You should receive an email confirming your order shortly after you’ve placed it. If you don’t receive that email, please check your spam folder and see if you can locate it. This is especially important because, if you haven’t received the order confirmation email, you also won’t receive the email with your shipment notification and tracking information.
We do ship internationally with a few exceptions. Please note that you, the buyer, are responsible for any VAT, tariff, duty, taxes, handling fees, customs clearance charges, etc. required by your country for importing consumer goods. We do not collect this beforehand, and can’t give you an estimate of the cost, because it varies widely around the world. Please do your research so you’re ready to get your package cleared through customs, and have an idea of what the additional cost will be.
All items with a value of more than AU $100.00 require a signature on delivery; please plan accordingly. We will be happy to remove the signature requirement on request; please contact our team before purchasing for details on what you require. Please note that, in this case, you will be accepting responsibility if anything were to happen to the package. We will take all the required precautions to pack your item well to avoid any incidental damages along the way.
When you purchase from us you purchase from a local business which was started by Matt back in 2008 with knowledge gained from working within top car brands. Today, there are over 15 staff members across 4 countries focussing on Engineering, Support, Marketing, Accounts and Sales.
We have opened a showroom in Brunswick, VIC to give you guys the chance to experience our quality first hand and get to know the product before purchase. Drop by and say hello. Our opening hours are Monday to Friday however, exceptions may be made to meet you there on a weekend.
Masten products come with up to a 2- Year Warranty and are built to last through extensive testing in the Australian outback. Since 2009 Masten Engineers have been at the forefront of vehicle electronics for both OEM and Aftermarket.
Most support is managed in- house by our experienced service technicians and in most instances a quick solution to any problem can be reached both within, and outside the product warranty period.
We maintain critical spare parts so in most occasions, parts are on hand and ready to solve your issues within a timely period. If we don't have the part in stock, in most cases we can get it in for you despite the product's age.
At DIG, we focus our attention on the quality and price to save our clients headaches and money on automotive, home and office products which have in the past costed you guys far too much. If you have any questions please don’t hesitate to get in touch with our Support team who are here to help.
More Info...We don't take ourselves too seriously; until it comes to quality! We're ultra-selective about the electronics, materials, manufacturing process, quality control and finishes of every product. Put simply, we only sell the best. Unless otherwise stated, DIG offer a minimum 12 month warranty (24 months if listed in the description) on products used for private use from the date of purchase (unless noted otherwise).
More Info...If you've purchased in error you may be entitled to return the product for a partial refund. We must be notified within 30 days of you receiving the item, and it must be returned in original unused re-saleable condition with all tags and packaging in the within 14 days of contacting us.
More Info...
