DESCRIPTION
2009, 2010, 2011, 2012, 2013, 2014 NISSAN MAXIMA (A35)
Godspeed Project's MonoSS is our one entity in our family of single-adjustable coilover suspension kits. These coilovers are designed to be a streetable race built coilover at an affordable price. It features a monotube damper that is made out of a carbon seamless steel 52mm tube with a performance internal piston providing maximum damper response. The cold-bent springs are made from high strength SAE9252 steel to optimize the balance between performance and comfort. Using race quality shock oil, Godspeed Project can guarantee exceptional damper performance at any temperature on and off the track. The top of the shock is attached to the car using a high quality top hat that features a high performance Japanese KOYO 6204Z bearing pillow ball mount (when applicable). The bottom shock brackets are made out of a T7075 forged aluminum or carbon steel brackets for lighter weight without sacrificing durability which also includes brake line brackets (when applicable). The MonoSS offers 16 level of damper adjustability which can be set to your preference.
FEATURES:
- Spring rates: Front: 8 kg/mm / Rear: 6 kg/mm
- 16 precise levels of damper adjustment
- Koyo Japan 6204z bearing
- Polyurethane bushing (if applicable)
- Monotube shock design
- Anodized shock body
- Lightweight aluminum lower mount and T7075 forged aluminum / carbon steel brackets
- 52mm carbon steel shock body with a performance internal piston
- Independent ride height and spring preload adjustments
- Race shock oil with a high viscosity index
- 1 Year Warranty from Date of Purchase
| Spring | Front | Rear |
|---|
| Rate(kg/mm) | 8 | 6 |
|---|
| Length (mm) | 200 | 180 |
|---|
| I.D. (mm) | 62 | 62 |
|---|
| Camber Plate | No | No |
|---|
Prior to installation, verify all hardware and properly preload suspension to 10mm. Our technical department is available to answer any other questions.
ADDITIONAL INFORMATION
| SPECIAL NOTES | Prior to installation, verify all hardware and properly tighten and spring preload is set to 5-10mm(1/4-3/8in). Our technical department is available to answer any other questions. |
|---|
| DAMPING LEVELS | 16 Levels |
|---|
| HEIGHT ADJUSTMENT | Yes |
|---|
| SPRING RATE(FRONT) | 8 kg/mm |
|---|
| SPRING RATE(REAR) | 6 kg/mm |
|---|
| SPRING LENGTH(FRONT) | 200 mm |
|---|
| SPRING LENGTH(REAR) | 180 mm |
|---|
| CAMBER PLATE(FRONT) | No |
|---|
| CAMBER PLATE(REAR) | No |
|---|
| SPRING INNER DIAMETER(FRONT) | 62 mm |
|---|
| SPRING INNER DIAMETER(REAR) | 62 mm |
|---|
SHIPPING
& HANDLING FEE 
- 9.25% tax for California buyers.
-
Buyer is responsible for any duty taxes, custom charges, etc. We will
not be held responsible.
For Puerto Rico, Hawaii,
and International
buyers:
Please provide your CONTACT PHONE NUMBER
(required for shipping purposes only).
It is because when shipping
to your area (PR, Hawaii, and international shipping), we want to make
sure we ship right and make
sure you will get it. Therefore, please provide contact phone number
to us. And only use for shipping purposes only.
Terms and Conditions-Return
Items:
Most Items comes with 30-day warranty unless noted
in the listing. Within the warranty period, defective item can be sent
back for replacement.
Item
must be returned within 30 days after the item is received.
Unused
and undamaged items can be sent back for an exchange or refunds. We
carefully inspect returned items upon receipt before issuance of
refunds, credits, or exchanges.
For returns, a 10-15% restocking fee will be applied. please make sure
that you have the right model and year of car.
For return items, buyers agrees to pay for the return shipping cost.
All returns and replacements must be
pre-approved, please contact us at before you send back the items,
otherwise you won't get the refund or replacement although you send
back the items.
Merchandise should be carefully packed and insured
for the full purchase price and
shipped via a traceable means (e.g. FED EX or USPS with Delivery
Confirmation)
Pick up service is not available for return
merchandise.
In the case of our error, missing items or wrong kit,
please contact us within 30 days of
receiving the item. We will take care of all the shipping charge and
no restocking fee will be charged.
Upon inspection, items found to
be unused, uninstalled, in resalable condition, and in original
undamaged packaging will be
credited less any applicable restocking or re-boxing fee. Items found
to be correct per the application, used, installed, not resalable, or
with missing or damaged original product packaging will not be
credited and the item will be
returned to the customer, if requested, at the customer's expense.
Please allow up to 7 business days for us to process your return.
