- Craft / Ferrite -make your own
- Flexible - strip, paper, signs
- Whiteboard / Fridge Magnets
- Magnet Testing Equipment
- Neodymium Blocks
- Neodymium Disks / Rods
- Neodymium Cubes
- Neodymium Rings
- Neodymium Spheres
- Neodymium - Self Adhesive
- Neodymium N52 - High Grade
- Neodymium High Operating Temp
- AlNiCo (Alcomax)
- Samarium Cobalt
- Fuel Magnets
- Limescale Magnets
- Magnetic Therapy
- Magnetic Toys
- Pot / Anchoring Magnets
- Special Offers
- Made In UK
- Arc Segments
- Other
Small 4mm x 1.5mm thin Neodymium disk magnets N35 250 -5000 pcs craft scrapbook
- £10.310
Technical Specifications
- Diameter: 4 mm (0.15")
- Thickness: 1.5 mm (0.05")
- Weight: 0.139g
- Grade: N35
- Coating: Ni-Cu-Ni (Nickel-Copper-Nickel)
- Maximum Temp: 80°C / 176°F
- Theoretical Maximum Pull: 0.7lb / 12oz / 328g
- Calculated Max Vertical Hold-guidance only: 0.14lb / 2.4oz / 65g
- WARNINGS:
- All neodymium magnets are unsuitable for children; do not ingest.
- All neodymium magnets are brittle; do not allow these magnets to jump together or to an iron/steel surface - they will break, crack, chip or shatter.
- Thin neodymium magnets DO NOT FLEX, if you attempt to flex them they will snap in half.
These are ideal for a large range of hobby crafting including scrapbooking and magnetising wargaming models. They are also good for DIY and MRO uses. If you need to use an adhesive, we recommend using something that will bind to metal and whatever surface you want to glue the magnet to.
The pull is calculated using a mathematical formula and is, therefore, the theoretical maximum hold between one magnet and a mild steel plate. It does not take account of manufacturing tolerances, plating, plating thickness or variances in a mild steel plate. The vertical hold is based upon the calculated pull and is, therefore, only for guidance. Factors such as paint thickness, plasticised surfaces, movement and vibration are not taken into account.